Cv Boots For R33 Gtr

[GDZILR]

Does anyone know the part numbers for the front driveshaft CV Boots for R33 GTR and where I can get them from? I want the new ones before I pull the old ones out. Thanks.

[wrxhoon]

Nissan have the boots , just give them the the vin but they are expensive around the $60 mark each .

You can get aftermarket boots for about $10-15 each .

[Sydneykid]

I used aftemarket boots, look the same as the Nissan ones but 1/4 the price. All you need to know is the CV OD and the drive shaft OD, then you buy the boot to suite. Don't forget the grease.

cheers

[ferni]

I checked aftermarket ones and they seemed to be a lot thinner than the oem boots, so i went for oem.

[wrxhoon]

They are just as good Andrew and they last well too, you can get them in a kit with a grease pack included .

[burko1]

aftermarket all the way , used them on my old 32 gtr never had a drama

[saliya]

Does anyone know the part numbers for the front driveshaft CV Boots for R33 GTR and where I can get them from?  I want the new ones before I pull the old ones out.  Thanks.

<{POST_SNAPBACK}>

Be careful that they don't have an odd internal shape. When I was doing the suspension upgrade

for my 32 GTR I had to replace 2 boots and the inner front LHS one isn't circular inside

Apparently some universal ones with the odd internal shape exist, but I couldn't conveniently get

one (ended up with a genuine kit for about $70 from Macarthur Nissan). The other boot kit was

$30ish (boot/2 clamps/grease).

Regards,

Saliya

[ferni]

They are just as good Andrew and they last well too, you can get them in a kit with a grease pack included .

<{POST_SNAPBACK}>

I just saw how thin they were, the oem ones came with greese as well and were much thicker/stronger so decided to spend the extra few $ ... can't hurt.

[wrxhoon]

Only your pocket mate .

[t01-100]

With track work and real tarmac rallys we have found the OEM rubber ones to fail.

Now use silcone replacments.