Jump to content
SAU Community

Recommended Posts

My car gets everything done at Hill Motorsports in Castle hill. Mark is a mate of mine and i think a few other people on this board go there too.

He does good work and damn good prices... he's always got sweet ass cars up there getting something done.

Hills - 8802 0777

Christian.

Link to comment
https://www.sau.com.au/forums/topic/969-skyline-service/#findComment-20418
Share on other sites

I ended taking it to online performance in Hoxton Park, where AIR the former owner used to take for servicing.

I did a full service basically everything got checked and all fluids and filters changed , and also i asked to get the spark plugs they said that it problay would'nt be required since they are platinium I thought jsut get everything done, lucky cuased it turned at the the sparks where not paltinium, and where basically gone.

They also gave me a written report on what was done and a list of problems that would have to looked at probaly on the next service, (brakes and left front shockl)

The thing i liked was that they gave me options on what i wanted, eg when it came to the oil they asked what type of oil I wanted etc.... and they also washed the car for me (bonus saved me doing it needed a clean)

So I would recommend Online Performance

Link to comment
https://www.sau.com.au/forums/topic/969-skyline-service/#findComment-21916
Share on other sites

Spiderman,

I may as well add my input here :P I will be having my skyline serviced at Hybrid in Artarmon.

Reason?

After a poor experience with another workshop on my previous car including failure to disgnose a serious boost problem, car running poorly etc and me getting fed up with hearing the words "she'll be right" i went to see Roger at Hybrid....

I dropped the car at 8am, was dropped to the closest station by one of his staff, they carried out exactly what i asked, found the problems i mentioned straight away, asked me to call them once i got to the station after work, picked me up again and drove me to the workshop. Roger then showed me 3 dyno sheets, explained what they changed, what they found etc, showed me the root of the problem and ask if i was happy with that BEFORE they charged me anything.......

Professional Service, helpful and conveinient..... thus i will be going back....

Hills is also good but like ONARUN its a bit far especially when i work near the CBD.

Link to comment
https://www.sau.com.au/forums/topic/969-skyline-service/#findComment-22072
Share on other sites

BY BY,

Where abouts is Hybrid at, also sounds like another good place to take our skylines, alot of dodgey places out there so i think its good to know where the good guys are.

Nothing worse than paying your money over and thinking yuor getting things down and it doesnt, i ahve a friend who is machanic for Ford, and he tells me storys for example how they thrash the cars on test drives sometimes when there bored, and if there flat out they dont change the oil filter or change other fluids that where in joba and stuff like that, the customer is none the wiser and still pays for it :P

Link to comment
https://www.sau.com.au/forums/topic/969-skyline-service/#findComment-22090
Share on other sites

Hi Everyone,

Well i dont thnk i should start another threads about this but its that time again, my car feels like it wants a service, a nice full one at that & i want to do the service myself this time around.

Can anyone tell me what needs 2 be changed around, replaced etc.

Im not trying to be cheap, i just think i can learn quite a bit about my car if i did it myself.

Thanks,

Joe.

Link to comment
https://www.sau.com.au/forums/topic/969-skyline-service/#findComment-22307
Share on other sites

Brendon.... yes UAS is good...

Spiderman: Hybrid is in artarmon

Ultim8DTM5: not being rude mate.... but this for recommendations... if you want to talk about who NOT to go to for whatever reason, do it on another thread.....2 of my friends have had serious cars built by hybrid, one is in progress.... but lets not get into that.....

and the topic is servicing... not rebuilds.

:uh-huh:

Link to comment
https://www.sau.com.au/forums/topic/969-skyline-service/#findComment-22537
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nah, if I need to fit people in a car I'll just use the Mrs car, the MX5 is perfect for what I need as a fun little sports car for fun on the street As for getting in and out of the MX5, I have no issues as I am a short arse who does lots of mobility training 🥷 If anything, I have been looking at Daihatsu Hi-Jets for a work hack, I helped one of my mates move some stuff with one recently that he picked up from Just Jap, it was a little ripper and plenty big enough for what we needed, it would also be super handy for me as I do alot of gardening, and plan on having some veggie patches and native gardens in the place I buy next year when I retire I did alot landscape gardening and growing veggies prior to my current job, and loved it, and that is a hobby that can keep me sane in my retirement, and as such, the little 300kg load capacity would be more than enough for what I need it to move around I have been looking at utes for just this purpose for a while now, and a near new 2024 Hi-Jet can be had for under $30k And I would rather look at a quirky little Hi-Jet than pretty much any other little ute, well, apart from a Brumby, I love the little Brumby, and weirdly have never owned one yet I was going to buy a heap of raffle tickets to try and win the Brumby that MCM built for Subaru Australia, but sadly I totally missed the raffle, I even filled in some form to be told when the raffle started so I could buy tickets, but to my dismay I was never contacted and found out I missed it when I was randomly googling Brumbys last year... #conspiracy  Maybe I should just buy a Brumby for a little "work hack".....LOL I use to be indecisive, but now I'm not sure
    • Well.... it's not just "de-oxygenating". If you do that you just have, most likely, ethane. So you still need to do a synthesis step to combine a number of ethanes/ethanols to make circa-8-chain hydrocarbons. And of course you don't want straight chain HCs, because n-octane actually has a negative octane rating (ie, it's worse even than the n-heptane which sets the zero on the octane scale!), so you have to do some tricky catalytic chemistry to synthesise branched HCs. That's all doable - but it doesn't come for free. And.... it starts with ethanol, which is an agricultural product, and there will almost certainly never be enough of that as a base stock to replace the liquid fuels that are in use. You really wouldn't want to be planning to be using any more ethanol for fuels than is currently already used (in E10, E85s, etc). And ideally you'd be looking to reduce such usage, as it is largely wasteful, particularly in the stupid-ole'US-of-A where the corn lobby has organised it so that it's actually primary production corn that is used to make a lot of the ethanol, not by-products and waste, like it is (mostly) elsewhere. So, what I said about needing free-ish energy probably still applies. True synth fuels would be made from H2 and CO2, in a near reversal of the combustion process. In fact, given that the H2 would be split from water first, it actually is a complete reversal of the combustion process. But...energy intensive. The human race burns something like 1 cubic MILE of crude oil, after it has been made into various fuels. Every year. That's a simply stupendous amount of energy. Just assume that the density is 900 kg/m3, and that the calorific value is 45 MJ/kg, then that is 165.9 x10^12 MJ of energy. Or more than 10^19 Joules. You get a maximum of 1 kJ/s per square meter solar radiation falling on the planet's surface, and so if you halve that for daylight, and halve it again for average weather (highly optimistic) and then take ~25% for the very best efficiency of solar panels, then you need about 85.7 billion square metres of solar panels to generate enough electricity to replace that liquid fuel energy consumption. Each panel is about 1m2. That's a rather large number of panels. We also burn about a cubic mile of coal. We also use hydroelectric power. We also use nuclear. We also use a number of other sources, both "renewable" and not. You can kind of ignore the renewable ones (except for hydro, because it will all end up getting subsumed into pumped hydro for storing other renewables, and so it won't be the standalone renewable that it originally was), so we end up needing a multiple of the ground area number that I just arrived at.
    • Corvette thread then? Don't say I didn't predict the future again. "I love the little MX5, I do, but I just want something a little easier to get in/out of, a little more cushy and some power would be nice - I miss the V8 Rumble... I found this clean red C5 for sale recently and..." I'll do you a great deal on the next step, which is one of those but you can fit people in it, too.
    • What about renewable diesel and/or gasoline? I see some projects spinning up like de-oxygenating ethanol to make drop-in compatible bio-gasoline especially in CA. I still think the future is EVs and we should've all gone full throttle on nuclear power after the 1973 oil crisis like France. Despite 15 years of work in CA to reduce the CO2 intensity of generation with renewables our electric grid is still far worse than even "low carbon" nuclear power. ICE is pretty cool when you aren't depending on the stupid thing to be practical and reliable and cheap as possible to get you to work every day. It's kind of like mechanical watches or vacuum tube amps.
    • I just rolled over "my" first 10k km in the MX5 Every time I go anywhere it always ends up in a adventure to look at houses and find some random country roads I've been on leave since early November but unfortunately need to go back to work on 19 January Luckily though I still have a fair chunk of leave left to burn until.... Not that I'm counting 😁
×
×
  • Create New...