Jump to content
SAU Community

Recommended Posts

Hey Kids,

I've scored a Cusco 2 way LSD which has gone into my R32.

Does anyone have advice on whether it is possible or advisable to use the stock rear centre to replace the open front diff?

As far as I know the stock LSD is a 2 way jobbie, and I'm worried that it'll cause understeering under brakes in tight corners.

I don't know if shimming the clutch packs loose would avoid this or if it's possible to alter the standard ramps.

Has anybody tried this?

Thanks in advance.

You are all beautiful.

Link to comment
https://www.sau.com.au/forums/topic/97089-tripping-on-lsd/
Share on other sites

Does anyone have advice on whether it is possible or advisable to use the stock rear centre to replace the open front diff?

Definately not possible. Rear diff is a 200mm crown wheel, front diff is something like 160mm.....the centre wouldn't even fit in the housing, let alone the front diff crown wheel.

Link to comment
https://www.sau.com.au/forums/topic/97089-tripping-on-lsd/#findComment-1762157
Share on other sites

Yeah, manual says model number F160. Completely different critter, so stupid question on my behalf.

I do believe that there are such a thing as R160 mechanical LSDs kicking around in Dattos and Subaru WRXs. I wonder what sort of splining they use? Heh, would be funny to see the look on the face of wrexy drivers.

Basically I'm a tightarse and I'm trying to find a cheap way to get front LSD.

Anyone got a subie diff schematic?

Hmm the carriers in these pommy sube forum photos look the same as the gtr schematics

Edited by FurryBarry
Link to comment
https://www.sau.com.au/forums/topic/97089-tripping-on-lsd/#findComment-1762468
Share on other sites

I do believe that there are such a thing as R160 mechanical LSDs kicking around in Dattos and Subaru WRXs. I wonder what sort of splining they use? Heh, would be funny to see the look on the face of wrexy drivers.

Non-STi rex's use an R160 with mechanical LSD as the rear diff (STi's use R180). The 'R' designation refers to the housing type, as does the 'F'. It _might_ be the case that an R160 centre fits an F160 housing, but frankly I'd be surprised if it was a 'bolt in' proposition.

Datto 1600's use an R160 diff in stock form although none came with an LSD (in Oz at least), and some have bolted in a rex centre, but usually an R180 is used because it's easy to fit and stronger. Some have even put in an R200.

Link to comment
https://www.sau.com.au/forums/topic/97089-tripping-on-lsd/#findComment-1762514
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, all the crude is used for fuels and petrochem feedstocks (pesticides, many other chemicals, etc etc). But increasingly over the last few decades, much of the petrochem synthessis has started with methane because NG has been cheaper than oil, cleaner and easier and more consistent to work with, etc etc etc. So it's really had to say what the fraction either way is. Suffice to say - the direct fuels fraction is not insigificant. Heavy transport uses excruciatingly large amounts. Diesel is wasted in jet heaters in North American garages and workshops, thrown down drill holes in quarries, pissed all over the wall to provide electricity to certain outback communities, etc etc. Obviously road transport, and our pet project, recreational consumption camouflaged as road transport, is a smaller fraction of the total liquid HC consumption again. If you're talking aboust Aussie cars' contribution to the absolute total CO2 production of the country, then of course our share of the cubic mile of coal that is used for power generation, metallurgy, etc adds up to a big chunk. Then there is the consumption of timber. Did you know that the production of silicon metal, for example, is done in Australia by using hardwood? And f**king lots and lots and lots of hardwood at that. Until recently, it was f**king jarrah! There are many such sneaky contributors to CO2 production in industry and farming. NG is used in massive quantities in Australia, for power gen, for running huge water pumps (like, 1-2MW sized caterpillar V16 engines running flat out pumping water) for places like mine sites and minerals/metals refineries. And there are just a huge number of those sort of things going on quietly in the background. So NG use is a big fraction of total CO2 production here. I mean, shit, I personally design burners that are used in furnaces here in Oz that use multiple MW of gas all day every day. The largest such that I've done (not here in Oz) was rated to 150MW. One. Single. Gas burner. In a cement clinker kiln. There are thousands of such things out there in the world. There are double digits of them just here in Oz. (OK< just barely double digits now that a lot of them have shut - and they are all <100MW). But it's all the same to me. People in the car world (like this forum's users) would like to think that you only have to create an industrial capability to replace the fuel that they will be using in 10 years time, and imagine that everyone else will be driving EVs. And while the latter part of that is largely true, the liquid HC fuel industry as a whole is so much more massive than the bit used for cars, that there will be no commercial pressure to produce "renewable" "synthetic" fuels just for cars, when 100x that much would still be being burnt straight from the well. You have to replace it all, or you're not doing what is required. And then you get back to my massive numbers. People don't handle massive numbers at all well. Once you get past about 7 or 8 zeros, it becomes meaningless for most people.
    • @GTSBoy out of the cubic mile of crude oil we burn each year, I wonder how much of that is actually used for providing petrol and diesel.   From memory the figure for cars in Australia, is that they only add up to about 2 to 3% of our CO2 production. Which means something else here is burning a shit tonne of stuff to make CO2, and we're not really straight up burning oil everywhere, so our CO2 production is coming from elsewhere too.   Also we should totally just run thermal energy from deep in the ground. That way we can start to cool the inside of the planet and reverse global warming (PS, this last paragraph is a total piss take)
    • As somebody who works in the energy sector and lives in a subzero climate, i'm convinced EV's will never be the bulk of our transport.  EV battery and vehicle companies over here have been going bankrupt on a weekly basis the last year. 
    • With all the rust on those R32s, how can it even support all the extra weight requirements. Probably end up handling as well as a 1990s Ford Falcon Taxi.
    • Yes...but look at the numbers. There is a tiny tiny fraction of the number of Joules available, compared to what is used/needed. Just because things are "possible" doesn't make them meaningful.
×
×
  • Create New...