Jump to content
SAU Community

Recommended Posts

well if you have to add a cross-over what exactly is the benefit to running a twin exhaust?

would one large pipe not do the same ?

The cross over won't necessarily decrease the volume of your 2 pipes.

In most setups, the crossover point is just a part of those 2 pipes that are joined, and have their connecting wall removed. It doesn't go into one pipe as such. So your total cross sectional area is not decreased, unlike with a single pipe with the same ground clearance.

The performance reason V8s do it is for scavenging, due to the firing order. With the way the exhaust pulses go down the exhaust there are benefits to having your twin pipes linked at one point.

so in short..

increased flow with better clearance.

so there is a reason.

what if your turbos WERE sequentially staged, would there not be greater benefit to running completley seperate systems?

because from a pressure point of view if one turbo is reacting first would that not create an increase in pressure behind that turbo and where the pipes join create back pressure for the second turbo ???

what if your turbos WERE sequentially staged, would there not be greater benefit to running completley seperate systems?

The answer is no, but I'm not sure how to explain it in a pithy manner.

Its going to actually be worse. If you have 2 completely separate exhaust systems (i.e. from the manifold onwards) then you're only getting half the exhaust load for each turbo, so you have to run smaller ones to make it viable, or introduce too much lag (which defeats the purpose of sequential turbos).

The plumbing would be a lot easier than the bypass-ridden setup that people actually use, but you'd only run "identical twin" turbos if you were to have 2 separate systems.

if i had a gtr i would have, custom tbo manifold, dual 3 inch from tbo back no cat or muffler just rear resonator, and a cross over pipe half way

well you have never had a full twin from front pipes(TWIN 3") have you.I confess i did not have X-over pipe you recommed just two rear individual mufflers.Had the RB scream but with a gurgle.It could be heard 3KM away on a warm summers night Just north of Adelaide .keep that in mind "IF YOU HAD A GTR".SYstem for sale(800km old) as now have 90mm titanium.

Yeah ill be using a cross over, same setup as a lot of twin GTR's in vic.

bear in mind my aim is not to be heard 3km away. I drive the car a little more than once a week and it is being built to pass noice etc

well I have a twin system on my GTR.... if you search under my name there are a stack of pics, and like yellow GTR man :) it is insane loud but sounds oh so cooool....

oh BTW I have a apexi butterfly valve to shut it up for some people that think 130db is anti social...

:D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hmm. Yes. I should have been clearer. 1000s for Haltech, for extra headroom. 725s for Nistune. You might even be OK with 640s, but if the possible power ends up much more than 300 rwkW you will run out of headroom on the 640s. That would probably be OK and a signal to not push it to that sort of power with Nistune anyway. At that level you probably do want to be thinking about engine protection functions. Oh, and all of that presumes 98 only, not E85. Well....the 1000s would allow you to run E85 at ~300rwkW territory, again, maybe sort of running out of headroom. Hard to tell with E85 - depends on the tuner as to how rich they like to set it up.
    • Yes.  The only scenario I can imagine when the answer isn't yes, is if you drive like there is highway patrol behind you at all times.  If your car currently runs, enjoy it and keep saving. Better costs more, keep saving until you can budget the better ECU. It's worth it.  Nope. Plenty of us making >300kw on unopened motors. Mine is unopened and makes about 350kw if I turn everything up, its fine (lots of caveats here, how the car will be used/abused, how long you expect the engine to last between rebuilds, how has the engine been maintained prior to coming into your ownership, etc etc).   
    • Sorry just wanting to clarify, at this power goal, which should I be going? Also, More info regarding suspension, the rear upper camber arms were used to get the camber back to i believe around -0.5 ~ -1 degree (@ Road and Race in Rydalmere), I forgot the exact figure, but ALOT less camber than what it came originally which was like -2.5degrees. Are the traction arms still recommended? The bilsteins from SydneyKid, they've got 400lb/in fronts & 275/in in the rear, revalved to his specs. Intercooler, I'm just having a look at some on Rakuten.jp and some other japanese sites. Might get something from back there, GReddy, Blitz or HPI, all crossflow. Looking at roughly $450-$500 AUD + shipping... Theres not many choices except that chinese branded Justjap unless you go for blitz return flow. Yeah, only downside with Haltech is the price ahhaha, so expensive, and with all the sensors if I go that route... $$$$$ yeesh. Are headstuds/gaskets needed for <300akw?
    • Haltech fanboi reporting in. Buy the Haltech! 
    • You can try shoving a borescope down there to see what's up.
×
×
  • Create New...