Jump to content
SAU Community

Recommended Posts

Well, I thought I'd practice what I preach and complement Ken and the boys @ Hyperdrive for fixing a problem with my car that had been bothering me for a couple of months.

Took the car in, took on of the guys for a drive, came back in, bang bang bang, problem fixed. 20 minutes of my time and a very large saving of money had I taken it elsewhere.

Thanks for your help Ken and Hyperdrive, it is greatly appreciated.

Regards,

Jason.

Link to comment
https://www.sau.com.au/forums/topic/97347-perth-performance-shops-are-useful/
Share on other sites

considering that any thread to the contrairy is closed its not that usefull really

its a bit like the ex iraqi information minister who im sure you all remember

07-minister.jpg

""There are only two American tanks in the city.""

Edited by arkon

I think letting others know if you have a good experience somewhere is what this forum is for !

I think at times... we should be able to also say if we have a bad experience somewhere too, whatever happened to freedom of speech on public forums?

What is a usefull thread then??? This is a car forum - A post about a workshop will be helpful to people if they are looking for somewhere good to take their car.... won't it???

Hyperdrive are a SAUWA sponsor - our club considers each sponsor carefully before adding them onto the team - the majority of us have had great experiences there (especially that time on the workshop bench ken - you were great :D ) and word of mouth is great.

But if everyone posted their good experiences and bad experiences - the forums would just get choked ... a little like they are now .... after all we aren't "Choice" Magazine here where we go rating everyone and everything and doing bacteria tests etc.

Useful to me is more the DIY stuff - performance related stuff - little things that we should learn to do ourselves rather than run off crying to a workshop for and wonder then why we are low on their priority list cos they are probably looking at you thinknig "and you own a performance car and don't know how to do this or what this is??". :P

I think letting others know if you have a good experience somewhere is what this forum is for !

I think at times... we should be able to also say if we have a bad experience somewhere too, whatever happened to freedom of speech on public forums?

Damon - why dont you read what Prank said on this in the 'useless' thread..

Here's the link incase any of you cant find it

http://www.skylinesaustralia.com/forums/in...pic=97008&st=20

Hyperdrive are a SAUWA sponsor - our club considers each sponsor carefully before adding them onto the team - the majority of us have had great experiences there (especially that time on the workshop bench ken - you were great ;) ) and word of mouth is great.

But if everyone posted their good experiences and bad experiences - the forums would just get choked ... a little like they are now .... after all we aren't "Choice" Magazine here where we go rating everyone and everything and doing bacteria tests etc.

Useful to me is more the DIY stuff - performance related stuff - little things that we should learn to do ourselves rather than run off crying to a workshop for and wonder then why we are low on their priority list cos they are probably looking at you thinknig "and you own a performance car and don't know how to do this or what this is??". :D

Thats fair enough :) Although I admit I have been here a little while and did not know that Hyperdrive were a sponsor - where can I find stuff like that??

  • 2 weeks later...

I think shops should remain anon and then pm the person

workshop could have fixxed your car but f**ked up 12 peoples cars trying to learn wat a f**ken turbo does

do it enough times you will eventual get it write

law of averages

all shops are shit sometimes

my 2 cents james

I think shops should remain anon and then pm the person

workshop could have fixxed your car but f**ked up 12 peoples cars trying to learn wat a f**ken turbo does

do it enough times you will eventual get it write

law of averages

all shops are shit sometimes

my 2 cents james

This is why we dont go to Automasters because they would think a turbo is used to power neons. You go to a performance workshop because they know what the hell is going on.

As for them f**king up peoples cars im sure any decent perth Workshop (theres only about 5 or 6 in metro perth). Would happily sort you out if they broke something, in most cases im sure they would fix their mistake and avoid telling you, or do it and tell you after they did it and they replaced it for you with no charge.

All the shops arnt shit, some take more care, some take less, some charge more, some charge less and some just rip you the bork off.

Take the time to look around and what workshops are around, get prices, get advice and get your shit fixed!

No excuses for lazyness.

P.S. its Right not write

Now this thread is useless! Everyone knows the workshops everyones got their preferences and alot of people have close ties with one or the other. Find a workshop, dont just drop your shit in and leave, take a moment to have a chat to them, if they do you a favor buy them a 6 pack they will remember you and take care of you! Its the little shit.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Hi all. Been a while but things are moving along. I just have something that I am wondering about. Since I will use OEM turbo oil pumbing, I got myself a new bolt, the one that goes into the engine block oil feed. As I recall (and see visually) this bolt comes restricted with I think a 1.7mm hole? Not quite sure but it was something around that size. The turbos have 1mm restrictor bolts installed, as necessary due to ball bearings and my higher oil pressures. Can I now just use that OEM bolt with the 1.7mm hole in for the engine block or will this actually be too much oil flow restriction and I have to drill it out first? In my head it would make sense for the bolt to be at least 2mm wide as both turbos take "1mm of oil flow". Do let me know if my logic is flawed here, I just want to make sure I don't kill my turbo bearings with too little oil. Don't know if I can trust the saying I read somewhere that ball bearing turbos essentially only need an oil mist
    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
    • Yeeeppp, been following a lot of the testing on the latest Xona stuff and there are some mental results.  He also went over 1000hp @ 4 hubs on his Mainline with a XRE6364S (63mm) which was also well into the 20psi range before 4000rpm on a 2.5. Crazy stuff. Fwiw the XRE5964S is basically the modern equivalent of their old HTA3582 - would drive nicely enough on an RB25 or 26, but proven capable of a huge amount of power if you want to spicy with rpm tho even at sane boost levels will make stout numbers 
×
×
  • Create New...