Cefiro Exhaust

[QUIKBLADE]

If anyone has bought a "pre-fabricated" exhaust system for their ceffi, could you post up what brand and size etc, maybe even a picture?

OR... does the Ceffi have a "sister" car that an exhaust system will be able to match from?? for example: S13 coil overs fit to A31 Cefiro....

Thanks.

[someonestolecc]

I would say you could pretty much use a R32 exhaust if you just change the mounts. The recesses in the floorpan however I think are fairly standard.

That's only a guess though. - your best bet is to drive to a wrecker or something and get a r32 one and just place it under the car to have a look and be prepared to weld some mount points.

Otherwise someone more knowledgable than me could probably comment too

[rhiga]

Laurel,

C33 is exactly the same as a31 you can also use r32 dump pipes

no worries

But the actual exhaust brackets, on a31 are different to R32 but you just need

to get them changed.

[konect]

reinhart make a nice exhaust for cefiro. Need dump/front and cat though.

Should just be able to get these seperately.

[Mr Eps]

contact doriae86 from WA he might still have 3" stainless steel catbacks for sale, i have one on my car it's schweet.

[Hella Flush]

go custom

thats what ive always done...

but if there ever was an exhaust id get pre-fabed... either buddyclub spec II or signal titanium...

[konect]

go custom

thats what ive always done...

but if there ever was an exhaust id get pre-fabed... either buddyclub spec II or signal titanium...

<{POST_SNAPBACK}>

And they make these for Cefiro ?

Link please

[sky80]

are the r32 same as ceffy? i noticed the ceffy exhaust comes out more towards the middle of the car and all other nissans (except c33) all come out pretty close to the left corner

[too_much_boost]

R32 and cef aren't interchangable. Cef are different to most other nissans due to the placement of the spare wheel

I just made myself an exhaust. Problem solved

[konect]

R32 and cef aren't interchangable. Cef are different to most other nissans due to the placement of the spare wheel

I just made myself an exhaust. Problem solved

<{POST_SNAPBACK}>

Also the reason you cant have the muffler on a big angle

[Softy]

just cut the wheel well...... been done b4

[konect]

just cut the wheel well...... been done b4

<{POST_SNAPBACK}>

You pov bitch !

[someonestolecc]

just cut the wheel well...... been done b4

<{POST_SNAPBACK}>

Well.. it's been a long time but I think we finally found something that a zip tie won't fix.

[Hella Flush]

im selling my cefiro catback system next week if anyone wants it... think its apexi or some crap... 3" stainless cannon

[drift monkys]

interested in the exhaust man... where are you located??

[DEJA VU]

so...can I get it confirmed that a r32 dump/front pipe will or will not fit a cefiro?

thanks

[Resin]

haha i was about to ask the same question.....

i think someone says the dump fits off an r32 but what about both etc? as im lookign at the batmbl twin dum front etc

[S13Deviat]

I think the R32 dump is fine, but front pipe is a no go.....

[QUIKBLADE]

yeah I actually found that the front pipe for a 32GTST is too short and DOES NOT fit the Cefi... had to get different one made by Reinhard to meet cat. Dump pipe should be 5 stud off turbo and (think) 3 stud triangle to bolt to front pipe.

[Resin]

so it doesnt actually hit anything .....its just too short? .....so u would just need a bit made up in between the front pipe and cat ......is this right?