Jump to content
SAU Community

Recommended Posts

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

got the new alternator and dropped off at the mechanics.

its the same unit basically from a series 2 33 although it has a different part # no and its rated at 90a instead of 80a so thats a bonus also.

thanks to all those who helped in assisting me with the hunt, always good to have a helpful group of people to assit, specially matt who organised one for me and basically delievered it to me

thanks heaps guys

love you all

:(

ok good news is car works and runs. bad news is battery warning light is on and still running on 14.9 15.0 15.1 volts (the old was about 15.5volts).

the battery light was never on until now, so im thinking new battery

altho car starts and runs fine with alternator plugged in and it started first sho too after 4 days of not running so not sure what the deal is. hmmm

i fitted a stock series 2 one but it was rated at 90a instead of 80a

ok after some more driving here's some of the wierd stuff ive noticed

boost control is slightly less accurate, it seems to spike lots more

active lsd seems to work a stack better, but still failed once

voltage hovers around 14.9 with lights on, lights off 15.1 (never higher)

voltage reports from hand controller, rsm and turbo timer all seem about the same

battery light stays permentantly on

manifold pressure seems to vary everytime you tap the throttle at idle.

usually it used to always be around -450 or -480mmhg now it seems to go between -300ish and -420ish each time u tap the throttle, like it bounces between those values each time, boost guage and boost controller show the same thing, -380mmhg in digital and the marker on the guage varies each time

car runs fine

idles fine

stereo fine etc

when u start the car with altneratore unplugged battery light is off and runs fine, around 12.8 volts. havent measured output from alternator with mulimeter yet.

will book into an auto elec on monday as we are out of ideas

thanks for everyone's help much appreciated

Paul wouldn’t you expect the voltage reading to be around the 15's while it was charging the battery??.. I mean i think there is always a certain amount of power drawn from the batt to keep the alt working as far as im lead to believe (could be wrong) so maybe it's just the current charging the batt. at least it's allot more consistent now than what your old one was as it was deff reading too high you would imagine..

  • 2 weeks later...

ive had an auto elec look at the alternator that came off my car.

it runs on the bench fine and outputs 14 volts correctly so something else must be wrong with my car. getting it looked at in the morning

Paul wouldn’t you expect the voltage reading to be around the 15's while it was charging the battery??..
No, it should be regulated to around 13.8V, regardless of how full or empty the battery was. It might produce more current, but will always produce the same (regulated) voltage.
I mean i think there is always a certain amount of power drawn from the batt to keep the alt working as far as im lead to believe (could be wrong) so maybe it's just the current charging the batt. at least it's allot more consistent now than what your old one was as it was deff reading too high you would imagine..

Only time the alternator will draw current from the battery is prior to startup. Once the engine is running, then the alternator supplies all the necessary current to run the car and re-charge the battery.

problem solved. there was a missing fuse in the boot (go figure) which forms part of the alternator and regulator circuit. so the alternator was running at full capacity, hence the high voltage. only $88 to diagnose and test my old alternator and diag the missing fuse and replace it

happy happy joy joy

so i now have a spare alternator :)

thanks to all those who offered help and support. you have all been an awesome resource

nah the fuse was physically missing so it was removed by someone or left out when was someone was fixing something or vice versa. very odd i must say. and the fuse is in the boot too which is really awkward to get to

ohhh ok i thought you meant it had fried out or something... very strange... and problem is as nothing is written in english it's not as thought you know whats what to check if something is missing anyway...

picked up car today. running at 13.8 volts and steady. idle seems spot on (used to fluctuate every now and then by itself sometimes). boost control is perfect now and doesn't vary at all. somtimes the evc would have troubles maintaining the right pressure and sometimes do its override cut out, once every few weeks it would do that. a-lsd seems to be much much better but has still failed once. everything else seems hunky dory. glad its all fixed. have a spare (tested) alternator to suit r33 if anyone needs one

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • @joshuaho96 Hmm considering the drama you've seen/experienced, have you looked into getting a built complete long motor shipped from Australia?  Considering the AUD is basically monopoly money when compared to the USD, at a glance this seems like a good option?
    • Bloody Skylines, they put you through the bloody wringer! Stick at it! Stunning drag strip BTW! Where is it? Can see part of the name on the slip and probably should just Google it!
    • I mean the other day I had to walk someone through diagnosing why their timing belt was walking off the cam gears. At least one of the issues was a bent tensioner stud. Local mechanics have found runout on the CAS mechanism causing weird failures. I'm also no saint here I've documented some of the things I've had to learn the hard way. Something I discovered recently is that my CA emissions catalytic converters weren't even welded correctly to align the downpipe to the main cat and they tossed the support bracket that goes from the transfer case to the downpipe to support everything there. I spend a lot of time chasing down these decidedly unsexy problems and the net effect is it feels like I never actually get to the original objective (flex fuel, VCAM, oil control, cooling, etc).
    • At times with how you make everything sound, all I imagine Americans doing when they see a gtr is standing there looking at it and bashing it with a gun like how a caveman would with a club and hoping it fixes itself 
    • I think this is just a product of how the US market works for this stuff. Shops are expensive and there's no real way of knowing what kind of results you're going to get, people don't really have the institutional knowledge. I have heard too much at this point to really put faith in anybody "full service" except maybe DSport and they aren't really a full service kind of shop. If you go to the right place I have no doubt they'll get it right for you. Some locals have set it up right but the cost really is nuts and even now they're still fighting issues. And you know I'm a crazy person who thinks things like twin scroll, relatively short low-mount cast headers, PCV recirc to intake, recirculating BOV, right-sized for ~400 whp, MAF load, validating all of that to a standard comparable to OEM test programs, etc are relevant. For what it's worth, multiple local owners at this point have been stuck in a perpetual cycle of blowing a motor -> getting someone to rebuild it -> some missed detail causes the bearings to wipe and spin just outside of break-in mileage or drop valves or some other catastrophe -> cycle repeats. I usually only find out about this because I'm perpetually helping random friends with diagnosing car troubles, Skyline or otherwise. The single turbo stuff if I'm honest is mostly secondary, it just doesn't seem to achieve the numbers in the ~2000-3000 rpm region that I would expect given the results I've seen here or in Motive's videos. I don't really know what we're missing here in the US to be causing this. Lots of people like to emphasize the necessity of finishing the project first and foremost, but I'm not made of money and I can't afford to be trashing a 15k+ USD engine build with any regularity. Or spending my relatively limited garage time these days unable to triangulate problems because too much was changed all at once. Also, even if it isn't a catastrophic failure I would consider spending the cost of single turbo conversion with nothing to show for it to be pretty bad. 
×
×
  • Create New...