Jump to content
SAU Community

Recommended Posts

well guys, ive purchased a pair of gtr bovs and the assembly and was going to put them on my s14, just a few questions

why is there 2 on a gtr?

wat is the little 2mm or so hole that vents to atmophere in the side of the bov?

will i still get that cool "chooo" sound if i only use one? (blumbed back of corse) because fitting 2 in my engine bay might be abit harder than i thought it was going to be

also what do they bovs sound like when they vent to atmosphere?

thankx guys, any help appriciated :D

Link to comment
https://www.sau.com.au/forums/topic/97840-1-or-2-gtr-bovs/
Share on other sites

2 bovs as there are two inlets, two afms, two turbochargers

each has its own recirclation valve and airflow meter reading so you need two

Nah, its actually one pipe, nothing to do with 2 turbos/afm's. Leewah/nige/ben all use big single's remember :D

If you look the stock crossover pipe thing they two BOV's join into the one hose.

well, thats what i thought from briefly looking @ my two im using on my next project :(

Link to comment
https://www.sau.com.au/forums/topic/97840-1-or-2-gtr-bovs/#findComment-1776794
Share on other sites

I dont own a gtr but i think after the bovs come together that pipe splits into 2 again and one comes in infront of one turbo and the other the other turbo right?

i recon using one would be fine aslong as you have a splitter at the end so equal air is put back infront of each turbo, also only having one means only 1 vacuum line, so one of the existing lines would have to be blocked off

Link to comment
https://www.sau.com.au/forums/topic/97840-1-or-2-gtr-bovs/#findComment-1777368
Share on other sites

well guys, ive purchased a pair of gtr bovs and the assembly and was going to put them on my s14, just a few questions

why is there 2 on a gtr?

Flow area - you could achieve the same effect by having a single larger one with the same flow

area as the two added together, but there are probably good reasons why Nissan went

with two smaller ones rather than one larger one that I'd hesitate to guess at. If you've got

the whole assembly you'll see that they join back to a single recirc pipe which then splits

back into two under the stock airbox and rejoins basically just before the inlet side of

the turbos.

wat is the little 2mm or so hole that vents to atmophere in the side of the bov?

no idea; having not pulled one apart I'd assume it's to permit air equalisation between the

atmosphere and the bit 'between the diaphragm and the valve itself'...

will i still get that cool "chooo" sound if i only use one? (blumbed back of corse) because fitting 2 in my engine bay might be abit harder than i thought it was going to be

The sound's related to the volume of air and the speed it moves at - you might find that

one is louder/higher pitched than two together because the air will have to move faster

through a smaller total orifice and for longer to get rid of the same volume of air.

I've never tested the difference, so that's pure conjecture.

also what do they bovs sound like when they vent to atmosphere?

Probably very similar to any other VTA BOV. It's just air moving around, after all.

Some BOVs have funny characteristic sounds, but I doubt that the GTR ones

will... suck it and see :D

Regards,

Saliya

Link to comment
https://www.sau.com.au/forums/topic/97840-1-or-2-gtr-bovs/#findComment-1778139
Share on other sites

just a question...do you "have" to have these 2 bovs on a RB26 since its using 2 afms ?

what happens if you dont have bovs on a gtr thats using a stock ecu and stock afm's?

thanks.

You mean if you take them off or replace them with a different single recirc BOV will the

car suddenly stop working ? No. My car doesn't have the BOVs; I removed them to

put an oil cooler in. It works fine.

But BOVs are supposed to have tangible benefits; one of them being that of less turbo

wear at gearchanges due to the turbos not 'running into a solid wall of air' if that makes

sense. And you'd need a fairly large single to give the same flow area as the twins;

I don't think I've ever seen one that big. _Someone_ probably has, though :D

Regards,

Saliya

Link to comment
https://www.sau.com.au/forums/topic/97840-1-or-2-gtr-bovs/#findComment-1778169
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My take on gg2 48mm, 54mm, 58mm, and 62mm compressor map for same size compressor vs gg1 : All gg2 only outflow gg1 above 20 psi. As all g gen 2 surge line at lower left of comp map move to the right, all gg2 sacrifice spool vs same size gg1, surge line move to the right worst for 54mm gg2. So for same size compressor if you want best response, use gg1, if you want max hp at >20psi use gg2 but you will be laggier vs same size gg1. Max compressor efficiency drops to max 75% on all gg2 vs max 76%-80% of same size gg1. Iirc lower efficiency means hotter iat less dense air so lower hp at same operating point of comp map. Also curious why gg2 is mapped to lower max rpm vs same size gg1 (only 48mm size both gg1 gg2 mapped to same rpm) : 54mm gg1 165,000 rpm  vs  gg2 160,000 rpm. 58mm gg1 150,000 rpm vs gg2 140,000rpm. 62mm gg1 145,000 rpm vs gg2 140,000 rpm. If gg2 can safely spin to gg1 rpm then they can flow a bit more than as mapped. Good thing that all gg 2 interchange compressor and turbine housings with same size gg 1. So gg1 owners can buy gg2 chra only if planning to boost >20psi.
    • My stuff is all with Shannon's, granted, I don't really have imports I'm driving on the road, however, I've had multiple cars at the same time with them. Presently we have the Landcruiser on laid up cover, Sarah's Kluger on full cover, and the house insured. About 18 months ago Sarah wrote her Subaru Liberty GTB off, insured with Shannon's, and the payout, and buy back of the wreck was super quick. In 2020 we had the VF Commodore totalled in a major hailstorm. Storm was on the Saturday, I called on the Sunday and lodged it, vehicle was towed on Tuesday night, assessment team called on Wednesday to say it was a total loss and get payout details, money was in the bank on Thursday morning. Have had a few other claims both at fault, and not at fault, over the years, and never had an issue with them.   Funnily enough, they're also the cheapest insurer I find for things like Sarah's Kluger.   I will say I'm less impressed dealing with them lately around "the experience", as a lot of their staff that you deal with aren't car enthusiasts. Shannon's has a much more main stream feel ever since they decided to become "big corporate", laid a heap of staff off, and then hired a bunch of non enthusiasts. At the same time they've been making a push to be less "call us and we'll personally have someone who cares help" to "hey, this computer can do stuff for you" and are trying to get more square pegs to fit round holes. (That's just the vibe I get from them). Again, have had no issues with claims with them, but get a bit of a "less personal" feel from them.
    • A thing I wasn’t happy with with enthusiast was during the initial phone call they told me they’d insure it for 130k but needed photos.   I then sent them photos and they told me $80k as there were other cars either similar modifications available for around that price, I told them to send me the links to said cars so that I can buy them. i then sent the modification list with prices of the parts (no labor) and the price then came to 115k, which is still shy of the 130 that was agreed in the initial phone call 
    • Ask me a bit later this week before payday
    • I agree that delayed payment probably isn't the most suitable solution. It seems a solid complete transaction would be best. As I wouldn't be using this sale as a line of credit that would typically earn interest, we can probably arrange a much cleaner single transaction deal. I can do $92.52 today. Would you prefer EFT, or Cash on Pickup?  😛
×
×
  • Create New...