Jump to content
SAU Community

Recommended Posts

none down here yet...i tried to get some today...

the chick gave me a leaflet though:

ph 1300 1300 27

or go to www.bp.com.au/sms

and they'll sms you as soon as ultimate is available in your area

ya.. still no sign of it..

Shellz click my siggy, info is there also :D

Link to comment
https://www.sau.com.au/forums/topic/97889-ultimate-is-back/#findComment-1779336
Share on other sites

Went to the BP/SMS site - why the hell do they need so many details to send you a simple SMS?

In my opinion, I would rather they just ask for a first name, suburb, and your mobile number. All the rest is a bit pointless.

I hope I don't get spammed by them...

Link to comment
https://www.sau.com.au/forums/topic/97889-ultimate-is-back/#findComment-1787951
Share on other sites

Got that SMS today too, but it said:

"BP Ultimate, your favourite fuel, will start returning to NSW today. Look out for it! Thanks for your patience."

I guess that that means it will gradually return, and it won't be everywhere as yet.

Oh well, at least it'll be back...

Link to comment
https://www.sau.com.au/forums/topic/97889-ultimate-is-back/#findComment-1807884
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • To be determined, Luke, to be determined. 馃榿 Definitely the car
    • It might be worth having a good look at the chassis behind the bumper then; most people prefer the series 2 look so it might have been changed to cheaper parts as part of an earlier repair
    • The car itself a series 2. I was just curious about the headlights and just wanted to confirm that they were series 1. Good to know the rest of the front end is series 1. It鈥檒l be easier for me to find parts on the aftermarket side of things lol
    • If you've wired up the coils & injectors properly, & have the neo CAS loom for the trigger, it should all work. The VCT works the same way so just different plugs between s1 & neo. Assuming DBW if no IAC. Don't bother with the stock boost solenoid with g4x.
    • THERE IS NO IAT SENSOR ON ANY SINGLE TURBO RB. And the one on an RB26 is not for "engine control" - it's really too big and too slow and is only used for over-temp alarming (as far as I can tell). Anyway, you don't have one. You want/need one for the Link, then you need to buy one, find a spot for it, and wire it in. You do know that the stock boost solenoid is not capable of "control", right? It is merely on or off, for the low boost (5 psi) and high boost (7psi), which the ECU enforces mostly based on gear. The stock solenoid is not for PWM control and is not plumbed up in a way to provide it. If you want to control boost properly, then you need a proper MAC valve. And yes, you can wire either of them direct to the ECU. Well, I assume you can - I don't know what the boost solenoid pins on the plug and play Link are capable of. They really should be as capable as any normal Link - but seeing as it is plg and play, it might be limited to stock functionality. Read the doco.   You really do just want to plug stuff together without understanding how it works, right? I can't help you there. I don't know the plug types or pinning on half the stuff you're asking about. If I had to do it I would sit down with the wiring diagrams, the car/looms and a multimeter and work out what is what.
  • Create New...