Jump to content
SAU Community

R33 S2 Running Very Crap

GtstCoupe

By GtstCoupe,
in Engines & Forced Induction

 Share

Recommended Posts

GtstCoupe Proficient

GtstCoupe

Posted
Posted

hey guys i went down to see my car about 4 or so days ago and saw my car now they were moving the car in and out fo the factory each morining and night and so more as well, now i notice the air flow meter was not hooked up or there and the hose from the top cooler pipe to the waste gate was not there either, now i went down today and they siad it run out of fuel on idle and so they filled it up and now it runs crap and just stall and willnot cleanly rev like you hold it at 2500 or 3000 and it not like what is used to be and i have some noise in the area or my cams and timing case which i never had whole thing just sounds really bad ,now first the car shoulnt run whith out the af meter and no hose on the wastegate i could only imagine, now i spoke to my mechaninc and told him he siad could be a dead meter or fowed plug(s) or vacume leak , now it has a new hks cooler kit, so i am wondering has some one drivin my car and Ducked it

no for people who dont know i crashed my car and i stuffed my fmic and guard etc and some side panels 1/4 etc not pretty. now could a hard impact stuff af meter cause it did hit there and break a mount on my airbox, and bent cooler pipes and put holes in it .now is was dirty and dust grassy crap in my engine bay after accient from shrubs etc so could this have gotten sucked up and done bad stuff, the car was drivin about 5 or so ks to a friend place ,so could that have done something to anything.

any advice would be great just trying to figure out if the panel shop has stuffed my car

Link to comment
https://www.sau.com.au/forums/topic/97972-r33-s2-running-very-crap/
Share on other sites
Morgs Veteran

Morgs

Posted
Posted

Are the intercooler pipes connected? Will not idle properly if they're not.

Is the AFM connected? Couldnt' work it out from your post. If its not, it won't idle/run properly.

I'd say in any case your plugs have been fouled.

The Mafia Grand Master

The Mafia

Posted
Posted

dude, if you've had a bad front end smash do you really think its going to run ok?

Get the chassis fixed, then take it to a mechanicfor diagnosis. If you're claiming insurance, then this should be covered.

By the sounds of it, there are air leaks everywhere, afm isn't even plugged in, and all of your pipes are bent.......

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • PranK
      My BMW 335i

      By PranK · Posted

      No. I think it's gone. 😭 I think you can get body coloured ones on eBay so I think I'll get one of those... Or just hang a red ribbon from the hole and whack a TOW sticker next to it.
    • Milkmun
      Cleaning my wheels 😍

      By Milkmun · Posted

      Can't say I've had a bad experience with one on my car, then again it only gets washed once or twice a year... The wheels on the other hand, get a good spray often due to my shitty dusty pads.
    • Shoota_77
      Shoota's R33 GT-R RB30/26

      By Shoota_77 · Posted

      @MBS206 thats pretty neat and tidy to me!  I'll get a photo of mine when I'm out there next. It might require multiple photos to understand the scale of the atrocities though... In total I have 4 sheds of varying sizes and layouts. Main shed is 14x8, second shed is 3x8, third shed is 11x2.5, fourth shed is around 6x4.  All are pretty much full.   The main goal of my cleaning tsunami is to make the main shed predominantly car and motorbikes only. Second shed is my metal fab room (2 x bench grinders, drill press, bench belt sander, metal band saw, scrap metal storage and some of my garden tools.  3rd shed is more bigger garden stuff, storage for engine crane, jack stands, concrete grinder, concrete mixer, air compressor lives there, and it now has two 2mx2m pallet racking shelves with itemised boxes holding building stuff, electrical stuff, plumbing stuff, etc, etc.  The 4th shed is Ryobi electric ride on mower, mini boom sprayer, ancient Kubota tractor, more garden stuff!  I have got a lot of shit....  Then there's the pool house (8mx4m) and the pool pump shed (4mx4m).  I built all of the sheds over the 11 years we've been here.  The main shed was a Ranbuild kit, the rest are all custom made to fit the areas available. Building the main shed taught me a LOT as I had no idea about building anything prior to that!  I've still got one more in me. It will be my man cave which I poured the extra concrete for way back when I poured the concrete for the main shed. The idea is the Skyline will be a centre piece of the main cave once (if...) it's finished.  I told my now 14 year old son yesterday that I will 100% drive him to his year 10 formal in 2 years. Still a long way off but at least I now have a date to work towards! 🤣
    • niZmO_Man
      Duncan's V37.......race car?

      By niZmO_Man · Posted

      Modern oils are amazing. Add tyres to that as well.
    • MBS206
      Shoota's R33 GT-R RB30/26

      By MBS206 · Posted

      Probably a smart choice to buy one vs build, purely for the motivation part as you said! Imagine the metal dust everywhere from grinding all the steel to build one. Ha ha ha!   Also, post a photo of your garage.   Mine is below, this is where I've been cleaning and have already half filled a caged 6*4 trailer. And this is after my cleaning expedition mentioned previously... The middle normally has a car in it, but I'm dumping things in the middle as I sort through them. And poor skyline was dusty and has had the lightest few drops of rain and now it looks atrocious and needs to be dragged back out and washed thoroughly! And yes to the right is technically another bay, you really can only see 2 bays out of 3 in this picture.  
×
×
  • Create New...