Jump to content
SAU Community

Recommended Posts

I know my car isn't a skyline but I tried to start my car up this afternoon. I could hear the starter motor clicking but the crank wasn't turning over. It's just a ticking sound and nothing else.

I got the rechargable starter pack and jump started the car after the second go.

Is this just a weak battery? Or is it something else?

Link to comment
https://www.sau.com.au/forums/topic/97975-car-wont-start-up/
Share on other sites

How old is the battery? How long since you last started the car?

The clicking sound is the solenoid engaging the pinion of the starter motor onto the flywheel. At the same time. it connects the circuit to spin the starter motor. The starter motor draws a LOT of current / voltage. If the battery is low, it draws so much that the solenoid can't hold, and the circuit disconnects.

It sounds like it could be the battery, as I has the same problems.....

I'd find that when it was dying, you'd hear a couple of clicks, and the dash lights would dim, or go out...

Add a jumpstarter (battery etc) and she'd start fine...

After checking my battery, some japanese battery >4 years old, 4 cells were indicating bad...

Went and got a new batt with fitting for $100.(Higher capacity too)

The Batt I got was a MF55B24L - It didn't fit the battery tray as it is larger (I wanted bigger) - But bolts in quite nicley.

I've had the car since Feb this year and looking at the battery it looks rather old. Connectors look find and there is no corrosion though.

Ill get another battery and hoprfully that'll be the end of that. Thanks all who replied!

if the battery doesnt charge up ur alternator isnt working porperly...

This is incorrect. The alternator can still put out a good voltage but the chemical reaction in the battery does not occur, therefore it does not charge. If he can jump start it and the car continues to run, that is usually a good sign that the alt is working fine as it is actually keeping the car running...not the battery.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Strength. And on the early RB26, full engagement of the pump drive.
    • I really don't understand the point of aftermarket oil pumps if your particular engine doesn't need more oil pressure. As far as I can make sense of it the problem seems to be cavitation from sucking air, maybe the pump gear design with how it interfaces with the OEM crank, and maybe the backing plate screws wanting to loosen themselves. How does flowing more oil fix these issues?
    • More photos are up, and the price has been dropped to $16,000. It's just had a service and a new 12V battery, too.
    • I agree on doing some better than factory pistons, rods, and oil pump. For anyone using the vehicle on the road, I don't get why everyone wants big cams. The stock cam profile, with some more lift would be mint for road usage. Everyone going big cams and then wondering why it isn't as responsive in traffic, when they've shifted the torque curve upwards an additional 1000RPM. Make torque, at lower RPM. Sure it's not as cool as claiming "500KW" and revving it to 8,0000RPM, but that same torque 2,000RPM earlier... Then you don't need the extremely high end pistons and rods, and blah blah blah.
    • Personal experience. Those f**kers burn. And are actually a PITA to put out. Next time I walk down the back, I'll snap a photo of what the inside of the bonnet looks like when that thing ignites. PS, powder fire extinguishers are useless on that stuff too as it's fibrous and when it ignites, it starts to pull apart. And you end up just blowing powder through a sieve effectively.   Like the big thing is, if it's fire resistant, it's job is to stop what burning? The METAL above it? It's just to try keep heat off the bonnet paint work.
×
×
  • Create New...