Jump to content
SAU Community

Recommended Posts

They are based in Belmont, in Perth and I work about a 2 minute drive from them :), but its a distribution office only, not a store.

Theres a fair list of cars I want already...

I currently have 2 Jada Design Toys cars, a black Mitsu Eclipse and an light grey R34 GTR, but they are only 1:43 scale and I want the 1:18 scales B)

they arent made to be full blown replicas,

the panel alignment is because i didnt have all the screws it at the time (you can change the front/rear bars, motor, exhaust, etc)

here is the pic of it out of the box..

http://members.westnet.com.au/taffyt/R34/DSC01776.JPG

post-98-1134274194.jpgpost-98-1134274537.jpgpost-98-1134274773.jpgHere are mine

Try Gamesworld Whitfords they can order what you like.

My daughter works there part time when not at Uni.

If you speak to a chick there who knows her Skylines then that's her. (she's surprised a few guys with her knowledge of cars)

post-98-1134274194.jpgpost-98-1134274537.jpgpost-98-1134274773.jpgHere are mine

Try Gamesworld Whitfords they can order what you like.

My daughter works there part time when not at Uni.

If you speak to a chick there who knows her Skylines then that's her. (she's surprised a few guys with her knowledge of cars)

what is the scooby worth? my housemate is after a GC8/GDB model..

Anyone tried Stanbridges hobby store in Mt Lawley? They have a massive catalogue of this sort of stuff that can be ordered in from Japan as well. I got a blue AutoArt R34 GTR from these guys for about $90. Check their website at http://www.stanbridges.com.au/

"My cat's name is Mittens"

Edited by MacGuyver


  • Similar Content

  • Latest Posts

    • CTIS (Central Tire Inflation System) has existed since the 80's. I'm looking into buying a Hummer H1 and they generally included it. 
    • My idle is set at 950rpm though - Moving the timing around 20 degrees is not really what I'd call a calm idle. That said... neither is chop, by definition. The LS ECU likes to adjust timing to hold idle as opposed to air. It'd work, but generally speaking there'd be a discrepancy in the base idle and the IACV would want to move the timing around anyway to maintain said idle. I think I'm just going to keep the timing steady anyway. Preserve my engine mounts.  My aircon is now officially regassed. As the guy was reversing I noticed my reverse lights do not operate, along with my reverse cam. This is a bit distressing, because 100% of guides talk about which wire to connect to backup cams as "the goes with the [other color] wire". Often when doing conversions. Unfortunately the R34 colour wires aren't documented Unfortunately I had a T56 Magnum gearbox with it's reverse switch, which also isn't documented. Unfortunately there's definitely not documentation for people with both of these in the one car. Unfortunately I forgot. After many hours of this, I have a reverse cam and reverse lights again. The wire going through the trans tunnel to the reverse switch had broken. Upon inspection, it looks like this one wire had about 7 spade terminals and extensions in it.. for reasons I cannot possibly comprehend. I also spent the 750 hours required to clean up the wiring behind my head unit which now looks like this: This is a monumental improvement relative to what used to be there WRT triple gauges, head unit, traction control, wideband controller, and whatever the f**k OEM stuff still exists there in various states of connectivity/needed. Next step is to check in at the Exhaust shop to see/confirm how much clearance I have, to decide what mid mufflers or 'resonators' (which are just straight through, narrower mufflers) I can add and hopefully cut out a lot of exhaust leaks, pinhole, v-band or otherwise. But first step will be to 'take a look' before the next step.
    • Fark the AFM card and Nistune, Haltech Nexus S3, DBW, cruise control, flex fuel, dis dat.  
    • It's most likely the bolt/bush where the cover bolts back wore and allowed cover to move forward.
    • Still haven't put the injectors and R35 AFM in so we can tune the bloody thing for the HG highflow it got mid last year! I think I can forecast the upgrade path to a bigger twin scroll, external gate, Haltech, flex setup, Samsonas, dis dat, etc will be .... a while away!
×
×
  • Create New...