Jump to content
SAU Community

Recommended Posts

Hi fellas

Im in the market for the boost controller and would like to hear your thoughts.

What do you recknon is the one that stands out appart from apexi.I was having a look at Blitz SBC Spec S which is single solenoid boosting upto 1.2 bars. Seems very good, the down side is being a single solenoid.If you've got any suggestions please advise me of it

Thank you

Link to comment
https://www.sau.com.au/forums/topic/98407-new-boost-controller/
Share on other sites

I recommend the GReddy Profec B-Spec II.

The cheapest JDM EBC and it holds boost well. Comes with bells & whistles such as peak boost recording, gain settings, real-time boost reading (like a digital boost gauge).

However it is only single solenoid. Shouldn't be a problem unless you're going to be running huge PSI.

i run a Blitz SBC-iD, holds up to 2.5bar and it's dual solenoid.

So far have had no issues what-so-ever and it mounts very nicely in an R32 ashtray to keep prying eyes in the dark. Kind of nice that it has so many options and that you can pick them up used for about 300$

I bought it because everything in my car must be controllable from the interior and a manual boost controller doesnt offer that. It's a wonderful little toy purely because of that feature alone.

more info here...

Blitz SBC-iD

Hi fellas

Im in the market for the boost controller and would like to hear your thoughts.

What do you recknon is the one that stands out appart from apexi.I was having a look at Blitz SBC Spec S which is single solenoid boosting upto 1.2 bars. Seems very good, the down side is being a single solenoid.If you've got any suggestions please advise me of it

Thank you

Don't know from experience, but I've heard good things about the dual solenoid version of the one you're talking about. Blitz SBC Spec R. Autobarn have them retailing for $799, and the Spec S for $599, but I know you can get the Spec R (dual) delivered for $500 if you do your research :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It only looks tidy, as most of the stuff that was on the whole back wall, is now in the trailer to go to the tip, or has been shoved in my 2.2x2.4m "Spare parts room", and now I can't get to anything in there Ha ha ha I could definitely do with a bit more space, but I'd just end up with your problems I'm going to enclose the car port beside the garage, and move a lot of stuff into it I think. OR... It will be setup as a fabrication area, and the main garage will have parts storage in it. I'm not sure yet... Need some pictures of that big shed you've got with the bikes and Skyline in
    • No. I think it's gone. 😭 I think you can get body coloured ones on eBay so I think I'll get one of those... Or just hang a red ribbon from the hole and whack a TOW sticker next to it.
    • Can't say I've had a bad experience with one on my car, then again it only gets washed once or twice a year... The wheels on the other hand, get a good spray often due to my shitty dusty pads.
    • @MBS206 thats pretty neat and tidy to me!  I'll get a photo of mine when I'm out there next. It might require multiple photos to understand the scale of the atrocities though... In total I have 4 sheds of varying sizes and layouts. Main shed is 14x8, second shed is 3x8, third shed is 11x2.5, fourth shed is around 6x4.  All are pretty much full.   The main goal of my cleaning tsunami is to make the main shed predominantly car and motorbikes only. Second shed is my metal fab room (2 x bench grinders, drill press, bench belt sander, metal band saw, scrap metal storage and some of my garden tools.  3rd shed is more bigger garden stuff, storage for engine crane, jack stands, concrete grinder, concrete mixer, air compressor lives there, and it now has two 2mx2m pallet racking shelves with itemised boxes holding building stuff, electrical stuff, plumbing stuff, etc, etc.  The 4th shed is Ryobi electric ride on mower, mini boom sprayer, ancient Kubota tractor, more garden stuff!  I have got a lot of shit....  Then there's the pool house (8mx4m) and the pool pump shed (4mx4m).  I built all of the sheds over the 11 years we've been here.  The main shed was a Ranbuild kit, the rest are all custom made to fit the areas available. Building the main shed taught me a LOT as I had no idea about building anything prior to that!  I've still got one more in me. It will be my man cave which I poured the extra concrete for way back when I poured the concrete for the main shed. The idea is the Skyline will be a centre piece of the main cave once (if...) it's finished.  I told my now 14 year old son yesterday that I will 100% drive him to his year 10 formal in 2 years. Still a long way off but at least I now have a date to work towards! 🤣
    • Modern oils are amazing. Add tyres to that as well.
×
×
  • Create New...