Jump to content
SAU Community

Change Your Oil!


SKY031
 Share

Recommended Posts

I've posted this on another forum, but for those of you who reside here, I'm posting it here as well.

I couldn't decide whether to title this "Change your oil" or "Cleaning internals on a budget"....

it's actually a bit of both.

Firstly, CHANGE YOUR OIL! :)

A few years ago SKY031 came to be in my possession as a stolen recovered vehicle.

In the first few months of owning it, the rocker cover was removed so that it could be painted/polished.

When we removed the rocker cover, it became quite apparent that it's previous (south australian :) ) owner hadn't been terribly fond of changing the oil, and it was full of crusties.

We picked out the worst of the crusties, and then did the usual, changed the oil, did an oil flush, changed the oil again, and hoped for the best.

It was only a matter of time until something broke, but in the meantime it was still working, so in the spirit of "if it ain't broke don't fix it" life went on.

Well........ it finally broke. :)

Unfortunately I didn't get a pic of inside the rocker cover once it was removed, but to try and give you some idea of how vile the engine was inside, here's a shot of the rockers.

dirty.jpg

Needless to say, these needed to be cleaned before they were put back in.

Tried detergents.

Tried solvents.

Didn't work.

Turps won't budge 20 year old crusties, even with a toothbrush and lots of elbow grease.

Just as it was starting to look as if the internals were going to need to be cleaned by a pro, I had an idea.....

Which every day household product could accomplish such a mammoth task?

OVEN CLEANER!!!!

So out came the oven cleaner, and wouldn't you know it, the can was 99% empty. :)

Off to the supermarket I go.

Home brand oven cleaner $2.55

Home brand gloves .54c

Home brand toothbrush .55c

The satisfaction of being able to do it in my own backyard, priceless! :lol:

Here is a pic of what they looked like afterwards.

-take into account that the first image was taken in full sun.

the "after" shot was taken in shade, and dulls the shine a little, but you can still get an idea of how well it worked.

not_so_dirty.jpg

So to stop this from happening to you, give your car an oil change for christmas. ;)

Link to comment
Share on other sites

Wow.

When I first looked at pic 1 it looked as though they were chipped and pitted etc.

After a while I realised that this was just the "crusty stuff" that you mentioned.

I change my oil and filter every 5,000 and find it hard to believe that anyone can run their car up to the point that you showed.

Shame.

El Bee

ps. change your oil !

Link to comment
Share on other sites

You do realise the active ingridient in most oven cleaners is sodium hydroxide... aka caustic.

Which is fine for steel, cast iron etc but not for alluminium, lead and other soft metals.... ie. it will eat it.

It is the same chemical used in the "hot tank" at engine shops.

Link to comment
Share on other sites

I should have also gone on to say that all components that came in contact with the oven cleaner were washed extremely well with detergent and 2 different spirit baths so that no contamination was carried into the head... we also toyed with the idea of sticking them in (someone elses) dishwasher.

If any "melting" occured it would be a shame...

I'd be terribly sad if the tired old RB30 had to be replaced with an RB26. :lol:

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Great info @tidi0x  Will definitely be handy for others and maybe me if I decide to keep the shit box H pattern.
    • Bumping this up one last time.... I wanted to follow up on the clutch slave issue. I realized that what the issue comes down to is the pocket is flat milled, and the cylinder does not want rest flat. So in order to mount it correctly you will need to make a spacer for the fingers so the cylinder is floating. I took two plates of aluminum, drilled some holes and was good. I did still need to make the relief cuts in the bell housing, as even with the spacer the bleed section still interferes. The OE bell housing the mounting holes are raised from the housing.       
    • If the event in USA goes ahead will be interesting as it seems the rules will get more cars over here. Apparently the track is laguna seca too. Yeah s15, if I get a the lower dash trims, centre console and change front cross member to standard LCA position will fit clubsprint. See how rules are as i would rather do complete widebody than a bolt on flare to run the 295 with proper clearance.
    • If the car is legal height I can't see it being an issue. Found a thread on reddit that might offer some insight.   I got a ticket from a copper in QLD for my S15 being too low. They had this wheel thing on a stick that they put under the car and it hit my exhaust. Anyhow went to an exhaust shop to get the exhaust tucked up/hung a little higher and I wound the coilovers up a smidge. Don't think I even had to go back to the police station unlike when I got defected for having a carbon bonnet when I brought the S15 from the ACT to QLD and had to replace it and then rock up at a police station and have a yougish female officer who knew nothing about cars confirm that I had changed bonnets. Should have just painted the carbon bonnet yellow to match the rest of the car lol
    • Id like to race in the US i think alot of those track would suit me   For the s15? Youd be stuck between club sprint and the new Open Am wouldnt you depending on how much interior you have left in
×
×
  • Create New...