Jump to content
SAU Community

Recommended Posts

Ice Performance just finished dyno tuning my GTR tonight and I am very happy with the result.They actually hit a peak of 365rwkw,but toned it down to a safer 351.9 rwkw.

The car has

HKS 2530's

HKS dumps

HKS 264/264 cams

Z32 afm

Tomei pump

Nismo 600cc inj

Power FC

HKS ebc

HKS super dragger exhaust

Trust cooler

Arias forged pistons

This was done using Boost98 E10 fuel,if Extreme100 was available in more servos I would have used that.

post-16708-1134642313.jpg

Link to comment
https://www.sau.com.au/forums/topic/98582-r33-gtr-dyno-resultcamsafmpump/
Share on other sites

Nice result. Was talking to G about it before.

Love the rocker cover pics... G has been raving about the colour that Nick did em... it sure does look farking brilliant!

[/quote

Gerald has claimed the color,its called "ICE G GREY" :lol:

In 4th gear its making

5 psi @ 3000rpm

10 psi @ 3800rpm

15 psi @ 4100rpm

20 psi @ 4500rpm

22 psi @ 4700rpm

It makes over 300rwkw from 4800rpm,still making 350rwkw + at 7500rpm,extremely flexible on the steet.

The only other mod I want to make is to fit HKS exhaust manifolds,expensive labour wise for a small overall gain,but response should be even better.

M&M nice work and nice result for such low lift cams. I can personally say the HKS manifolds are the shit (awesome construction quality) and can i ask did you play with cam timing and if so what did you find to work the best.

pete

ps nice engine bay

I dont have an adjustable cam gear on the inlet side,only the exhaust.I was going to ask on here what sort of results people have got with this setup, which should be fairly common,with cam timing adjustments.We have left it alone at the moment,maybe in the future.

I dont have an adjustable cam gear on the inlet side,only the exhaust.I was going to ask on here what sort of results people have got with this setup, which should be fairly common,with cam timing adjustments.We have left it alone at the moment,maybe in the future.

well i would most definitely put an adjustable cam gear for the inlet on the wish list and you can really adjust the sort of power you get and quiet offen (most chaces increase out right hp) with adjustment of the cam gears. the inlet tends to adjust how early the power will be made ie a little advance can quiet offen bring the whole power curve on earlier and the exhaust advance can offen give a bit better top end hp. I stress every motor is different but i have not seen a setup (rb26) not responce to cam timing in some fashion its offen only other factures that limit the gains that can be had for cam timing ie the turbos reached peak efficience etc

pete

I really thought most of the benefits with adj cam gears was with stock cams.I would have guessed that HKS cams would work best straight up,or that gains would be minimal.Anyone have dyno figures of gains or do I have to be the guinea pig?

I really thought most of the benefits with adj cam gears was with stock cams.I would have guessed that HKS cams would work best straight up,or that gains would be minimal.Anyone have dyno figures of gains or do I have to be the guinea pig?

dude your no guinea pig i have worked the cams on like 6 different rb26 all have responded to timing some a little some a lot. The first of which was my own awhile back

http://www.skylinesaustralia.com/forums/in...=ST&f=8&t=48595

the least gained was still around 30rwhp with less than half the timing i had to put in mine. Each motor is different and dont always think that a little cam timing is different you may just be adjusting the cams to the correct relationship to crank as manufacturing tolerances can cause differences in this (we are talking small) but considering that 2 deg of crank timing (=1 deg of cam timing) gave me 30rwhp a small difference can be of great benefit Yes?

pete

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What could be causing my clutch problem besides a bad master or slave then? Both those parts are new 
    • Just came across this, but in QLD I start leave again in 2 weeks, if it is still available I might drive up and check it out Unless, @MBS206 do you live near here????, if so I could hit you up with a finders fee https://www.gumtree.com.au/s-ad/hope-island/auto-body-parts/nc-mx5-factory-hard-top/1328976391
    • My hold point for future mods is that I want a OEM detachable hard top first, but, finding one is a pain, MX5 Mania are looking for one for me, but, as hens teeth are more common, finding one in Australia is proving problematic  I can get a OEM one from overseas, hell, you can still get new ones in 'Merica, but, shipping is a absolute killer and I cannot justify the cost, or the risk of it being damaged during transport As for the aftermarket hardtops, whilst they do the job of being a hard top, and are fine for a track car, they don't seal well (read: leak like a sieve in the rain), and you need a plastic/poly rear window, plus they are a bolt in option only and not made to be easily removed I liked how the hard top on my NB could be fitted, and removed, by myself, in less than 5 minutes I know it sounds bad, but I'm waiting for someone to write off a car with one so I can swoop in on their pain, it will go to a good home though, so my guilt of this is tempered
    • I’ve got one on mine and it’s fine, 
    • No, you don't want to plug the vacuum line, as that will turn that side of the booster into an air spring and probably make it feel worse. I'm not saying that the GTR master itself doesn't need a booster. I haven't paid attention to the GTR one to know what size it is cf the non-GTR ones. But when you think about it - they have to do the same job, which is to move a little slave piston a few mm to do what it is supposed to do, and that final action is the same on all the cars. So, it is very unlikely that the GTR MC is any different than the others, because it has the same pedal stroke and the same output requirement. The booster just makes it feel easier. I'd suggest you probably have an actual hydraulic problem. It's totally common on these old shitboxes.
×
×
  • Create New...