Jump to content
SAU Community

Recommended Posts

Allright i know that the cancellation of this cruise was a big dissapointment for every1 to say the least.

Is there any1 out there who wants to go for a cruise and meet @ 10am this sunday.

Post up your interest and destination.

I guess if we did still hold one it would be a meet in the same place just cruise somewhere different.

Hell i dont really care if we cruised to newy like origionally planned.just that theere is a cause for concern.Hence the asking for input.

We could allways give our input on the day.And the destination doesnt have to be any further than the distance to newy.

#WHATEM SAY#

Edited please read.

Boys.And girls.ill say this.

I cant come on sunday due to underlying cicumstances beyond my controll.

I am shitted to say the least but there was nothing i could do about it.

I am all for helping you guys out forum wise with the organisation of it all.But thats as far as i can go for this cruise.

I will have to wait for the next cruise now.

You should all still go ahead with it.And yeah post up the pics of it.:D

Craig.

Link to comment
https://www.sau.com.au/forums/topic/98606-who-still-wants-a-cruise-this-sunday/
Share on other sites

Allright i know that the cancellation of this cruise was a big dissapointment for every1 to say the least.

Is there any1 out there who wants to  go for a cruise and meet @ 10am  this sunday.

Post up your interest and destination.

I guess if we did still hold one it would be a meet in the same place just cruise somewhere different.

Hell i dont really care if we cruised to newy like origionally planned.just that theere is a cause for concern.Hence the asking for input.

We could allways give our input on the day.And the destination doesnt have to be any further than the distance to newy.

#WHATEM SAY#

I still want to cruise on sunday for sure.. but yeah not to Newcastle.. I still wanna meet same time and place, sounds good to me!!!

I will be marshalling and driving at the Kids Race Day this Sunday.

Its a charity event for handicapped kids, to give them a taste of the track. If you've got nothing else on, you can always cruise on down to Oran Park and have a look.

There won't be an entry fee as such, but donations would be nice.

Yeah we could make ''oran park'' part of the cruise.If thats what every1 wants.Then bounce somewhere else.Or end up there at the end or whatever.

I will have to get your details so i would know more about the event.

Craig.

Boys.And girls.ill say this.

I cant come on sunday due to underlying cicumstances beyond my controll.

I am shitted to say the least but there was nothing i could do about it.

I am all for helping you guys out forum wise with the organisation of it all.But thats as far as i can go for this cruise.

I will have to wait for the next cruise now.

You should all still go ahead with it.And yeah post up the pics of it.:huh:

Craig.

cruse is still on inewy but we wont be going anywhere near noby's unless hav ok of someone in there.Look all sydney people still should come up the cops are very good up here as long as u dont have bald tyres your right.I ve never been pulled over and checked for defects yet there after lowered vans air bags that are not safe.I havnt seen them defect a person in newcastle for 6 months.

As for riots i think its going to be fine just young kids sending chain texts like emails.

Dont call it off, we want to meet u all we can go to redhead beach which is 20 mins from newcastle or somewhere else.

cant wiat till tomoz its cleared up now, so time to clean car now.

NO ULTIMATE STILL IT SUX

heres my mob number (0412573011)- u can ring me if u want to find out where newie crew is tomorrow

looks like its going to be a great day , hope to meet up tomorrow

Edited by bake

i'm in for SURE !! :) .. Just got my car yesterday and would love a cruise even though i did show it off abit last night :)

Jeez the thing loves petrol though :P , i filled up 2 3/4 tanks within 5 hours

first tank was 95 octane because 98 was out :D

P.S. Im coming cruise :) :)



  • Similar Content

  • Latest Posts

    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
    • Yeeeppp, been following a lot of the testing on the latest Xona stuff and there are some mental results.  He also went over 1000hp @ 4 hubs on his Mainline with a XRE6364S (63mm) which was also well into the 20psi range before 4000rpm on a 2.5. Crazy stuff. Fwiw the XRE5964S is basically the modern equivalent of their old HTA3582 - would drive nicely enough on an RB25 or 26, but proven capable of a huge amount of power if you want to spicy with rpm tho even at sane boost levels will make stout numbers 
    • The axels in my R33 seem tired, and have a bit of play in them. I cannot find any new of course, not interested in buying used, but I am looking to see if anyone can identify some cross compatible axles. In the states I have seen suggested for S chassis the J30 axles, however for the skyline (as best I can tell) the lengths are about an inch off (2.5cm) on both sides. R33 my measure L 22" R 24.5" GPT L 22.5" 24.25" J30 L 23.5" 25.5"  so shaft length is probably an inch wider. Not sure if someone has another still remanufactured option besides the J30. I figured worst case I can buy a pair tear them down and swap the center shaft. My other option was reaching out to GSP to see if they cannot piece together a set, since the axle stubs are still manufactured, I wouldn't think it be that hard to find a shaft or make a shaft work. 
×
×
  • Create New...