Jump to content
SAU Community

Recommended Posts

its been covered many times before, people trying to obtain stupid figures from the rb20 or similar variants. speak to a mechanic and get a price on your engine ideas, see how much its going to cost (and survive relibably). instead of the 26 you may want to look into the rb30 with the twin cam conversion as an alternative

Link to comment
https://www.sau.com.au/forums/topic/98610-how-do-i/page/2/#findComment-1798758
Share on other sites

Well ATM im straping on a T3/T4 Hybrid just to try and get a little better responce so that will be on for a little while Im not going for big power figures never was not interested in high HP or I would have just brought a GTR or a RX7.

Link to comment
https://www.sau.com.au/forums/topic/98610-how-do-i/page/2/#findComment-1798891
Share on other sites

about the closest to that rpm would be a counterweight billet crank like JUN/HKS which rate upto 13 000rpm with other associated parts (note: f**kin pricey $$$)

a revving engine is a total different thing to drive to a large capacity engine. personally i like revs heaps more, and the way the tacho goes from 4000rpm str8 to 8000rpm or whatever as soon as it hits boost is the best feeling.

slow revving might pull harder but they feel sluggish and deisel like, hehe, even my old mans 5L VN group A SS with vortech supercharger feels slow becuase the power is too linear. but each to their own :P

Link to comment
https://www.sau.com.au/forums/topic/98610-how-do-i/page/2/#findComment-1799100
Share on other sites

Perhaps you could get your tach recalibrated? This would be the cheapest way to get there (just keep quiet no one will know, they will be real impressed! ). Seriously though that is a pointless thing to do, if you even got the engine to stay together you would need massive head flow numbers you would have no low down torque the cars gearing would be wrong Blah

Link to comment
https://www.sau.com.au/forums/topic/98610-how-do-i/page/2/#findComment-1799858
Share on other sites

  • 3 weeks later...

Not a silly question about a high revving RB20.

Our goal is to cram 10,000 RPM out of these engines for drag racing purposes. The ten second barrier and beyond.

I really dont think it's that too hard a deal considering the strength of the bottom end internals.

Cylinder head max flow numbers may restrict you though. (not sure about this yet)

Their is a few threads on this, you may want to do a search.

Good luck.

Link to comment
https://www.sau.com.au/forums/topic/98610-how-do-i/page/2/#findComment-1833925
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Each to their own I guess  Me, I put just as much time into cleaning inside of the cars as I do on the outside As for getting wet, it is really no different than steam cleaning the carpets at home, apart from the cars carpet dries alot faster than the house, again, I only do it in the hotter months and leave the car opened up for a few hours As I only do it yearly, it is just before I do the diff and gearbox service, so I clean the carpets, then it's up on stands, wheels off, service, clean the undercarriage,  grease the bushings and do a nut and bolt check on everything  Disclaimer: I typically had all the time in the world to kill when I was working 馃ぃ, so spending a full day or 2 cleaning, serving and "looking at stuff" was,  easily achievable, and a fun mental therapy day As for time to kill, I retired last Wednesday, so apart from my physical training, my days are filled with lots of random jobs around the house and garden...."Idle hands are the Devils something something" I am also buying a new house sooner rather than later, I'm actually looking at a potential property tomorrow, I'm looking forward to getting a car hoist as I'm starting to get to old to crawl around under a car, I can only imagine all the undercarriage cleaning and looking at stuff when that gets set up
    • Yeah, I'm not interested in wetting the carpets, and I don't care about brown dirt/dust that lives deep in the pile or underneath. It's not like I crawl around on them in my birthday suit or eat dropped food off them (because there is never any open food in my car). The seats are alcantara (cheap Chinese imitation alcantara, to be sure!) with barely 1" of foam pad behind the surface. That's not getting wet either. Any car that I would be happy to get the interior wet, I would not care to put the effort into.
    • We have one that holds 2.8L of water. On floor carpet that hasn't been touched in 2 or 3 years, will take a minimum of 2 fills of the tank to do a bedroom, and that's going AROUND the bed.   In the cruiser, I used an ENTIRE 2.8L tank, just on the front passenger footwell. But it had some fungus growing, and had been full of mud from being used as a 4WD for many years. I can do that floor again, and it will still pull mud out. However, the water now only looks dirty, not pitch black and leaving full sludge in the bottom of the tank it sucks back into. Oh, and, this is about a $1500 unit.
    • This is mine, works a treat for the cars, suction is good, I use the Bissell clean and protect stuff I have found giving it a good spray and light scrub with the soft brush on the head of the nossle for carpet, and a rub with a microfibre for cloth seats and cloth door trims, prior to another quick spray before vacuuming it up works the best @GTSBoy You would surprised on what it gets out of carpet and seats that actually "look" clean, I recommend that you test drive yours when you have a little time to kill, then post pics of the muddy looking water that I believe you will find
    • I think even the "commercial" capacity ones that you would hire from supermarkets etc wouldn't have the capacity to do all that much in one go. I will go through half a dozen tanks of solution and dumps/rinses of the waste tank for one little 2 seat sofa. Or similar for one 6 footish rug. That's the price you pay for something small that only takes up a bit of cupboard space, instead of something that takes up the entire laundry cupboard or half the shed.
  • Create New...