Jump to content
SAU Community

Recommended Posts

D-Jetro = no AFMs

i just bought a normal pfc+controller. and 4 inch from turbo into the 2 afmeters would you swap + cash for a djetro. also wat are the 2 sensors and 2 nipples.

cheers

i just bought a normal pfc+controller. and 4 inch from turbo into the 2 afmeters would you swap + cash for a djetro. also wat are the 2 sensors and 2 nipples.

cheers

i will give you 1,000 for one if still available... thats the price i got quoted just dont want to wait for postage. i am in perth

Hi guys,

Where did u get BNR32/33 power fc with hand controller, nipples, 2 map sensors and harness for $1g?

If its $1g for the lot, i will take 10 please.

Everywhere else retailing for $1600+ landed in oz.

This is a good deal.

  • 4 weeks later...

They are fine for driveability. I had one put on my gtr last year with std 6 throttles. Good fuel economy to 500+ k's to the tank if you don't hurt it everywhere.

The $1000 quote would be the ecu with no map sensors (you need to) or extras to fit the pfc. Fitting is a bit tricky as you have to drill and tap the intake near the ports 3 & 4 for the map sensors.

Are these in Perth or still in Japan.

If in Perth , will take both of them.

To flyinng..

1K for the complete kit...

rofl.

Do your homework first before making claims like that :(

Cheers

Ken

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi Yes we're a bit optimistic we might get something out of sealing up the two pipes of the external wastegate and reactivating the stock one. I believe the orginal stock wastegate was tack welded shut. It doesn't budge and visually looks closed and sealed. The car has noticeably more lag so it could be at least part of the problem, maybe all. It's definately one of the key changes made since last tune. And it's one that's more difficult to fully understand and measure, not like for instance timing or cylinder compression.  Thanks for that feedback, we'll let you know how this progresses. Fingers crossed.   Regards Rob
    • Transplanting the vvt from a 25neo into an rb26?
    • Well, I was going to say, "Is the wastegate set up so that it is not leaking?" That's actually a different thing to what you're asking about. In theory, if you have allowed the two halves of the manifold to commmunicate (more than the stock manifold does - which is at least a little bit) then the negative effect should be apparent in delayed spool, not in outrigth power. OK, maybe just maybe, a badly set up twin scroll wastegate "crosstalk" might kill the top end, although it's hard to see how. What is happening with the original wastegate in the turbo? is it sealed off properly. If it's left flapping in the breeze, it will f**k everything up. If it is still there, and can be returned to service, I'd be capping off the external (presuming the two halves can and will be isolated from each other after doing so) and have a go with just the stock wastegate. I have an internal wastegate in my highflowed rear housing. The bigger opening and flapper should be fine to >250 rwkW. So there's not exactly a pressing reason to have the external. Done right, an external will give better results. Done wrong, it might just be possible to have worse results. Report back!
    • Hi Rob It's a nistune ecu. Yes same shop, good reputation. Apparently the computer on the dyno is compensated for temperature.    Chris was saying that the lean or richness of the mixture would be covered in the actual tune, but he's already picking up in advance that it's under what it should be. Regards the dyno, it's also noticeable on the road. But I just want to add something that has just come in, it appears there might be something in the setup of the external wastegate. In the exhaust manifold there is a centre divider between the front three and rear three cylinders. The external wastegate has a pipe from each side that join at the wastegate. Theory is those two pipes just might be pypassing that divider and introducing a problem somehow. Is anyone familiar with the divider in the exhaust manifold and the effects if the two wastegate pipes were to create a bypass path? Thanks for your questions Rob, interested in your thoughts on this external wastegate bypass theory. Regards Rob
×
×
  • Create New...