Jump to content
SAU Community

Recommended Posts

I hope that wasn't directed at me .

I think we can all see who the idiot is . You want to put 1.25 lt of oil in the mower tank , how much do you think the tank holds? Why do you think you mix oil with petrol in a 2 stroke engine ?

the purpose of this thread was to expand my knowledge. obviously i wouldnt post if i had a clue you idiot.

if you go insulting everyone who has a problem then you've got to be the biggest f**king cock smoker on this forum.

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

the purpose of this thread was to expand my knowledge. obviously i wouldnt post if i had a clue you idiot.

if you go insulting everyone who has a problem then you've got to be the biggest f**king cock smoker on this forum.

I rest my case , if you are going to insult people on here nobody is going to tell you anything . If you want to learn anything, stop the insults, shut up and listen .

If you keep this up all you are going to get is smart ass comments like you have been geting, its your call .

By the way , a power f/c will go good on the Victa , maybe a ebc , what about bigger injectors and while you are at it some poncams!!!!

wrxhoon, i would think poncams wont be good enough in this application. what he needs is some beefy top end. i don't think he's worried about the response as it's not a daily mower. weekend use only. I would go for some high lift procams to really fatten it up high in the rev range (about 800rpm).

secur1ty, don't get worked up mate, it's a pretty strange question to ask in general maintenance. if you had it in the wasteland you may get some more helpfull responses.

secur1ty, don't get worked up mate, it's a pretty strange question to ask in general maintenance. if you had it in the wasteland you may get some more helpfull responses.

i just figured i'd get a better response from a section for giving mechanical advice.

and it is pretty general isnt it?

i'd have to keep spraying it though wouldnt i?

plus my old man's a developer, he owns land and houses which go for a while without being maintained so i'd want something that will give me a power increase to get through a whole yard (approx 700m2 average).

I rest my case , if you are going to insult people on here nobody is going to tell you anything . If you want  to learn anything, stop the insults, shut up and listen .

If you keep this up all you are going to get is smart ass comments like you have been geting, its your call .

By the way , a power f/c will go good on the Victa , maybe a ebc , what about bigger injectors and while you are at it some poncams!!!!

that my friend has got to be the sadest response i have ever heard!!!!!! <_<

i'd have to keep spraying it though wouldnt i?

plus my old man's a developer, he owns land and houses which go for a while without being maintained so i'd want something that will give me a power increase to get through a whole yard (approx 700m2 average).

Now for my advice..... i suggest investing in a better and stronger lawn mower... maybe a ride on mower, since you have a lot of grass to cut, something with some balls.

ok i will give you some real advice. i am applying what i did to my pocket bike which has a edge cutter motor on it. (note: i dont take any resposiblity if your lawn mower blows up etc etc).

run a pocket bike pod filter which are about $30-50. then take the exhuast off it(if you can blows a lot of oil). now as for petrol i ran 98oct with a bottle of octane booster in 5 litres of petrol. now if your game you can run the oil a little leaner so it can rev a bit more. i did these on my pocket bike and it can rip massive burnouts for its size and it can get up to 75km/h to 80km/h. so apply at your own risk. and my bike has been running like this for about 5-6 months now.

apply at own risk.

mr 32

Just buy a new mower.

Second hand or whatever.But go bigger!

They have second hand ones for sale at the local mower shops for sure.

Or buy one of those turbo xs thingys that they put on N/A cars for an extra 20hp.Thatd be stage3 for the little mower.

HAhahaha.

On another note ''security'',ive seen you drive past Glenfield station a couple of times.

Nice car.

come on dude, im no dummy.

i know the lawn mower is lacking power, so im just looking at my options in terms of increasing it.

thanks RANDY, helpful info mate.

No probs, come to think of it... new spark plug definately, and then get some carby cleaner and give it a good blasting while covering up the vitals. You could have lots of dirt and grass caught in the intake. It works much like a carby, and like someone else pointed out, you may have a mixture and/or rpm needle which you'll need to get a flat-head screwdriver onto.

If it's really old and done the hard yards without maintenance, then the piston and ring could be nuked... in which case it's easier to buy another mower.

If you're feeling game, take half the day off and strip down the motor. Just unscrew and unbolt everything (noting where they came from) and clean the sucker right out. I'll bet the cylinder is pretty yukky, and i'm sure the intake is going to be clogged.

seriously mate if you come on here asking a bunch of hoons how to make a petrol burning machine go harder you've got to expect some humour. have you done a google search on this topic? tried sharpening the blades so it cuts through the grass with less resistance?

On another note ''security'',ive seen you drive past Glenfield station a couple of times.

Nice car.

thanks mate, my old man own a lot of town houses near there that i used to work on alot while they were building.

buying a new mower isnt an option. its pretty new but i just think it needs a service or i might need to play with the exhaust.

might just chuck on some webber carbies :blink:

Edited by SECUR1TY

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
    • I would agree, unless you need something specific to the HV motor/battery side repaired or investigated, any mechanic will be able to perform normal services, but if you prefer, maybe look for a mechanic who regularly services/repairs Nissans, the VQ engines are pretty common in the Nissan lineup.  Sorry, I can't make any suggestions, I don't live in Vic.
    • Some of them keep working fine. 9 out of 10 of them end up causing an absolute misery bleeding the system and get thrown on the workshop floor in a tantrum and never thought about again because they were never really needed and just added crap to the car that we could have done without. Same-same with HICAS, A-LSD, and various other stupidities that over eager 10x engineers thought we had to have.
    • Not required but appreciated. Super Coppermix Twin even the non-competition model feels like the pedal is noticeably heavier than stock which was pretty well judged IMO. I'll be swapping in the Nismo operating cylinder soon to see how that feels.  Personally I haven't felt anything that justifies replacing the damping loop, at least compared to more modern stuff where the clutch delay valve is actually quite noticeable.
×
×
  • Create New...