Diff Intercooler Pipe W/ Rb25 Turbo On Rb20?

[Fixxxer]

Hi everyone,

I have a R32 with a RB25 turbo and a FMIC.

Will I need to change the intercooler pipes (coming off the compressor cover of the turbo) if I revert it back to a normal RB20 turbo?

I gather they sit a little differently because I have a metal elbow piece from when the RB20 turbo used to be on there, but will the RB20 turbo go straight back on with the metal elbow piece and line up with my intercooler pipe thats there at the moment?

Thanks,

Fixxxer

[neo32]

nah should be abouyt the dsame

[BHDave]

The elbow that comes off the turbo is different between the 2 turbos. An rb25 turbo with the elbow will put the outlet in near enough the same place as an rb20 turbo with it's elbow though so the rest of your piping will be fine.

[Fixxxer]

Ahhhh, ok..

So both turbo's have 'elbows' but an RB20 elbow will not fit on a RB25 turbo compressor outlet...

Just wanted to make sure that if I throw the rb20 turbo with its elbow back onto the car that the pipes will all match up. Thanks...

Fixxxer