Jump to content
SAU Community

Recommended Posts

Hmmm.. I dont think it's a fantastic result.

I got my RB25DET done when I bought my car (57,000km's) and I got 160 across five cylinders and 150 on the other.

Yeah I heard that it's consistency that is a good thing, but the higher the better I think?

The guy who tested it (Unique Auto Sport in Castle Hill) said that they have tested heaps of RB25's and mine was up there as one of the highest they'd seen. I have heard a lot of people testing down around 140, but never as low as 125.

I'm not sure what the implications of this are though. Sorry I cant be of much help either...

Link to comment
https://www.sau.com.au/forums/topic/98939-compression-test/#findComment-1801813
Share on other sites

well, i dont know what to think right now, maybe i didnt do the comp test correctly...but its even across all cylinders to the lb, so i think its all good...the engine has been very well looked after, i just did it out of curiosity...try it again tomorrow, getting a rollcage fitted so maybe they'll point me in the right direction as what it is...

Link to comment
https://www.sau.com.au/forums/topic/98939-compression-test/#findComment-1802063
Share on other sites

125 isn't perfect but still in the reasonable limits. It's good when all the cylinder have lost compression equally, but losing compression doesn't mean a real lot as it's turbo, the turbo's will always have less psi than a N/A engine. I don't own an RB25 though but this compression is good enough (not great) for a turbo engine

Cheers

Link to comment
https://www.sau.com.au/forums/topic/98939-compression-test/#findComment-1802667
Share on other sites

theres no smoke or oil used, the turbo seals are blown out but driving off boost it doesnt smoke at all, power is still fantastic...i have a feeling the low readings were because my battery is ratshit...like i mean..if you start it and stall the car, be prepared to push it..that and my throttle body was closed...

Looking at my spark plugs, theyre almost brand new still, no buildup of anything at all, engine overall seems to be running brilliantly. Must have been the way i did it...

BTW, sorry nismoid...i searched but i didnt get a straight answer to what i was looking for so i posted a new thread...my bad...

Link to comment
https://www.sau.com.au/forums/topic/98939-compression-test/#findComment-1803007
Share on other sites

I wouldn't have thought this is much for an rb25, but I have heard that an even spread across all the cylinders is more important.

My rb25det from a 97' s2 r33 has between 153-160 across all cylinders, being the lowest and highest from all readings.

125 sounds a little low, but if the others say its ok if it aint using oil and water etc, then i could be wrong. Possible try testing another one if you can, just for reference.

Link to comment
https://www.sau.com.au/forums/topic/98939-compression-test/#findComment-1816005
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sounds good Hmm suppose the main thing is, how much do you care about this car? The filler doesn't make for a very good water barrier lol. If there was a tiny little bit of rust forming now, that in 3 to 5 years time becomes obvious under the paint (starts to bubble up), would it bother you? 
    • I already have the ability to datalog the voltage... what I can't do is correlate it to what the gauge is showing when I'm looking at the data at a later date. Or something like this. Except getting the oil to 125C+ involves me going 200+kmh at the track so you can imagine this is a little tricky unless I do something like note what the voltage is when I am at the top of 5th gear so I have a point to reference on. Drove car today. O2 still reading richer because hopefully not a leak instead of massive restriction I've introduced. Car really doesn't sound like a LS. It's quite strange. Pulled a bit of fuel out up top. This does potentially explain why my spark plugs looked like the car was running pretty over-rich. If I was tuning it to a ~12.7 which in reality was far richer than that in the past. It will be handy to have the dyno WB to compare my WB to to compare notes that's for sure. At this point I'm happy to just sit in the passenger seat and tune the thing given I've got about 7 million hours on the platform lol.
    • Yeah I understand you have to pay for an updated map or subscription service or something. But I can't even find a current map for Australia. My map is dated 2017, but didn't this car version still sell in Australia until 2021?   Also, just as an aside, the navigation system warns you of traffic incidences ahead.....why would they include that on a map they knew is not receiving live information. I am forever going to be warned of an incident that probably existed for 30 minutes 8 years ago.
    • Car has been sold and I am now selling leftover parts. Prices are non-negotiable as I will sell to my mechanic if it won't sell here. Prices are firm except for the Random Parts listed at the very bottom. All parts are genuine except for the S-Tune front bumper. Volk Racing TE37SL 19×10.5″ +12 5×114.3 pressed graphite with P-Zero 275 30 19 tyres [USED] $4,500 Wheels are in perfect condition, have been sitting in my garage for the past 6 years. Tyres still have 90% tread, but since they're now old, I would not recommend you drive hard on them. K-Sport Super Sport External Reservoir Coilovers (made to order) [NEW] $2,500 Front spring rate 14kg, Rear spring rate 7.5kg Fork Type. You can read all about it here (https://www.k-sportracing.com/product_detail.php?Key=12). I was going to start tracking the GTR, but never got around to it. Paid $3500 (after USD conversion and taxes). HKS Kansai Service Tower Bar [NEW] $500 Never fitted in the original Japanese box. R34 GTR S-Tune Fibreglass Bumper [NEW] $500 No mesh - No Box - No damage - just dusty. Nitto RB26 Clear Timing Cover [NEW] $50 Couldn't fit RB2630 due to bonnet clearance. HKS Piping Kit Special Type (BNR34) & Apexi Power Intake Air Filter Kit & Password JDM Adapter [USED] $1,000 Missing some rubber hoses and supports, but you get what you see. Nismo NE-1 Weldina Turbo Back Exhaust & Custom 3.5"straight pipe [USED] $1,000 Needs some love, but perfect for those who want to go back to OEM+. Bayside Blue Aluminium Vspec Bonnet/Hood [USED] $700 Came off my GTR. Unfortunately, the tips have been slightly ground down. It will need some repairing. Bride Low Max Super Seat Rails [USED] $350 The price is for both sides. Will post pictures when I get a chance. Random Parts [USED] - negotiable Standard rb26 cams (intake and exhaust) $10 Stock amber front indicators $10 Standard GTR bumper lower side grills $10 Stock amber side indicators $10 Nismo Sports Resetting ECU $50 Water reservoir $10 Stock airbox mouth $10 Stock fuel rail $10 Stock coilovers from R34 GTR Vspec $100 PM me which items you are interested in. I do work 9-5, so I will be responding daily at best. Best time for pick up is after 5 and before 7 on weekdays, or i can work something out on weekends. I will only accept cash or PayID. Pick up only - located Epping NSW area.
    • sensible choice....and all 32s should be in yellow
×
×
  • Create New...