Jump to content
SAU Community

Screws To Fit R32 Gtr Number Plate Threads?

Sol32

By Sol32,
in R Series (R30, R31, R32, R33, R34)

 Share

Recommended Posts

Sol32 Community Regular

Sol32

Posted
Posted

Hey all,

Just a bit stumped on screws for attaching number plate to R32 GTR. Ive been to bunnings, total tools, even melbourne bolt co. and they don't have the right size!

Where did you guys get yours? If anyone has 4 spare i could swipe / buy, that'd be great. Cheers.

SteveL Mentor

SteveL

Posted
Posted
To the guys that mentioned M6 screws - would these do?

Yes, but why buy 100 when you need 4 ?? (OK, a few spares is good, but that's a bit over the top......) The few bolts you need will cost maybe $1 from a bolt specialist.

Just check the yellow pages for bolt suppliers in your area. Ring them and ask if they stock M6 x 15mm (length....just a suggestion) hex head bolts or screws, preferably plated (zinc). I'll be very surprised if the first one you ring doesn't have them.

Note that places like AutoBarn, etc will have them.

Sol32 Community Regular

Sol32

Posted
  • Author
Posted

Turns out the same dude at Melb Bolt Co. who told me they didnt have to fit my application... as soon as i mentioned M6 "oh yeah, we got those"

Heh. Work experience ftw. :)

predator Grand Master

predator

Posted
Posted

they'll have them at a repco or supercheap in a big stand. Champion brand.

They'll probably also have them at bunnings.. usually they are in a big rack with pretty much any other bolt you could care to name in a packet of 4-5 of them.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • djr81
      R32GTR R200 reverting from Nismo centre to stock

      By djr81 · Posted

      It is possibly 55 degrees for the Nismo version. I had a look through the manual and the stocker has a breakaway torque of 2.5 to 3.5kgm. Supposedly the Nismo LSD goes down to 5kgm when worn in but it is pretty grabby even with very little throttle. Worse when cold. So I guess you have three things. 1. Shims. 2 Friction plates 3. Cams Would think shims would be the easiest but Ive no clue how many tenths of a mm shim thickness change equals how many kgm torque. Also not sure if the Nismo friction plates are similar/different to stock or if they are the most of the source of the diff being angry. Think I can write off the Nismo rebuild kit for the standard diff as not being what I want.  
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Yeah, it was a bit of confusion with me, I rang and asked if they had a boot for a soft top, and then the paint shop when they rang and were asked if it had a hard top on it, which it does, just not a PRHT....LOL Meh, whilst frustrating for all concerned it isn't a war stopper and should be a thing of the past in a week or two In other N/A related news, car is booked in at the end of the month for the cams, springs, retainers, harmonic balancer and retune  I might even pull the lazy arse card and get them to do a full service on it whilst it is there
    • joshuaho96
      R32GTR R200 reverting from Nismo centre to stock

      By joshuaho96 · Posted

      Factory LSD is supposedly a 2 way with a very conservative cam. If you've already tried adding friction modifier to the diff oil and it still locks up too much for your liking you might want to adjust the ramp rate on the cam to be more like OEM instead of reducing initial torque even further. People claim the 8 kgf-m disc kit for the OEM LSD is still very streetable but I've never been able to compare everything side by side on my own.
    • Ozdavroz
      NC MX5

      By Ozdavroz · Posted

      Oh man, at least it sounds they've accepted they stuffed up and not put it back on you...could see some confusion if they asked if it had a hardtop or not, and you've answered truthfully but maybe not answering their real question which is what roof did it have from the factory! Glad your keeping it N/A 2.5
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Nah, I much prefer colour matched Talking about colour matching stuff, the new/used boot lid turned up, all painted up perfectly......aaaannnndddd, it's for a power retractable hard top, not a soft top.....LOL They are now sending a boot to fit a soft top.....,  whilst frustrating, life is like that sometimes, sometimes you just need to dodge, duck, dip, dive and, ummm, dodge.
×
×
  • Create New...