Jump to content
SAU Community

Recommended Posts

Last week I had my GTR tuned on Boost98 for a dyno figure of 351rwkw.I used Boost98 after reading the article in HPI by Martin Donnon.

The car ran great with knock readings in the mid 30's,till the weather got hot,where I recorded low 70's.Nigel(Ice Performance) suggested we retard the timing 2 degrees and see what happens.Single digit knock,so we tried 1 degee retarted,where we got mid teens and left it there.The car is going back in for cam timing adjustments,so I just adjusted the timing in the settings screen,I had to do it every time I restarted the car.

Today,I was near a Shell servo that stocks Extreme100,so I thought I would fill up(47 litres) and test it out.I am now running 3 degrees advanced over the original setting on Boost98,thats 4 degrees more timing!!!!! and recording mid teens on the knock sensor.

I will be using this fuel on my next tune in the New year,highly recommended.

Between now and my next tune,I will try Ultimate to see how it compares.

Link to comment
https://www.sau.com.au/forums/topic/99217-boost98-v-extreme100/
Share on other sites

There are 2 Ethanol fuels.E10 has 10% and is sold by United as Boost98 and E5 has 5% and is sold by Shell as Extreme100.

Dyno figures are bound to go up dramatically as we had 365rwkw and had to knock out some timing using the obviously inferior Boost98.The 100 octane Extreme looks very very promising,allowing 4 degrees of extra timing while keepoing the knock lower,should also allow a little more boost.

Last week I had my GTR tuned on Boost98 for a dyno figure of 351rwkw.I used Boost98 after reading the article in HPI by Martin Donnon.

The car ran great with knock readings in the mid 30's,till the weather got hot,where I recorded low 70's.Nigel(Ice Performance) suggested we retard the timing 2 degrees and see what happens.Single digit knock,so we tried 1 degee retarted,where we got mid teens and left it there.The car is going back in for cam timing adjustments,so I just adjusted the timing in the settings screen,I had to do it every time I restarted the car.

Today,I was near a Shell servo that stocks Extreme100,so I thought I would fill up(47 litres) and test it out.I am now running 3 degrees advanced over the original setting on Boost98,thats 4 degrees more timing!!!!! and recording mid teens on the knock sensor.

I will be using this fuel on my next tune in the New year,highly recommended.

Between now and my next tune,I will try Ultimate to see how it compares.

which shell servo was this m&m?

Cnr Warrigal Rd and Centre Dandenong Rd Cheltenham,near DFO.

There are 5 shell servos on Burwood Hwy and 1 in St Albans as well.

thanks for that.

burwood hwy is a bit out of the way for me, so i'll have to try my luck in st albans.

Generally you loose power with ethanol blended fuels, so you have to advance the timing to get some of the power back. The good thing is, with careful tuning you can get good gains over the regular 98 RON stuff.

New 100octane shell fuel with 5% ethonal is what you want. you will not lose any power , you will gain timing,response and power.

I did some research ito fuel octane and detonation and have to wonder why the ethanol was added . I sort of though that the alcohol helped to make any condensation soluble but I'm beginning to wonder if slower burning high octane fuels need a bit of help at the cold start phase . The mighty 3 cyl G11 ran like a hairy goat at the first cold start on the Shell 100 but runs fine on it now . If anything it make a little better part throttle torque and the choke (showing its age here) is never needed .

It will be interesting to see if the other flavours of 100 octane fuels will have ethanol in them .

Cheers A

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Can't say I've had a bad experience with one on my car, then again it only gets washed once or twice a year... The wheels on the other hand, get a good spray often due to my shitty dusty pads.
    • @MBS206 thats pretty neat and tidy to me!  I'll get a photo of mine when I'm out there next. It might require multiple photos to understand the scale of the atrocities though... In total I have 4 sheds of varying sizes and layouts. Main shed is 14x8, second shed is 3x8, third shed is 11x2.5, fourth shed is around 6x4.  All are pretty much full.   The main goal of my cleaning tsunami is to make the main shed predominantly car and motorbikes only. Second shed is my metal fab room (2 x bench grinders, drill press, bench belt sander, metal band saw, scrap metal storage and some of my garden tools.  3rd shed is more bigger garden stuff, storage for engine crane, jack stands, concrete grinder, concrete mixer, air compressor lives there, and it now has two 2mx2m pallet racking shelves with itemised boxes holding building stuff, electrical stuff, plumbing stuff, etc, etc.  The 4th shed is Ryobi electric ride on mower, mini boom sprayer, ancient Kubota tractor, more garden stuff!  I have got a lot of shit....  Then there's the pool house (8mx4m) and the pool pump shed (4mx4m).  I built all of the sheds over the 11 years we've been here.  The main shed was a Ranbuild kit, the rest are all custom made to fit the areas available. Building the main shed taught me a LOT as I had no idea about building anything prior to that!  I've still got one more in me. It will be my man cave which I poured the extra concrete for way back when I poured the concrete for the main shed. The idea is the Skyline will be a centre piece of the main cave once (if...) it's finished.  I told my now 14 year old son yesterday that I will 100% drive him to his year 10 formal in 2 years. Still a long way off but at least I now have a date to work towards! 🤣
    • Modern oils are amazing. Add tyres to that as well.
    • Probably a smart choice to buy one vs build, purely for the motivation part as you said! Imagine the metal dust everywhere from grinding all the steel to build one. Ha ha ha!   Also, post a photo of your garage.   Mine is below, this is where I've been cleaning and have already half filled a caged 6*4 trailer. And this is after my cleaning expedition mentioned previously... The middle normally has a car in it, but I'm dumping things in the middle as I sort through them. And poor skyline was dusty and has had the lightest few drops of rain and now it looks atrocious and needs to be dragged back out and washed thoroughly! And yes to the right is technically another bay, you really can only see 2 bays out of 3 in this picture.  
    • It's more like on average the things I see a lot of things going wrong. Yes, usually the people who reach out are the ones who are having problems but on average it feels like mechanics and tuners here aren't really competent. I swing between thinking my standards are just way too high and wondering whether people really are just this dumb. I just had the strangest 10+ reply argument on a Facebook group over someone insisting that the factory R34 GTT boost control solenoid reduces boost pressure to 5 psi when it's on and raises boost pressure to 7 psi when it's off despite showing the exact plumbing in the factory service manual and the solenoid behavior detailed in the FSM.
×
×
  • Create New...