Jump to content
SAU Community

Recommended Posts

R32 Gtst:

Engine: Rb25det conversion (rebuilt, forgies), Flowed head/port polish, HKS 275 camshafts, HKS head gasket, Trust Td06-25g turbo, Trust top mount manifold, Trust 50mm waste-gate, Trust front mount intercooler, Trust Oil cooler and relocation filter kit, GReddy Type-R BOV plumbed backed, 850cc injectors, 3inch dump pipe, 3inch dump pipe back exhaust, custom cold air intake box in standard intercooler position, HKS filter, earth wire kit, huge radiator. HKS F-con V.

Suspension And Running Gear: Rebuilt Rb25det gearbox, brand new twin plate OS clutch, Nismo locker diff, Tein adjustable coilovers, 17inch Nismo rims.

Exterior: Genuine GTR front bar with N1 air slots, Type-M side skirts and rear pods. Blue pearl white respray, Semi clear factory indicators.

Interior: Front and rear GTR seats, Skyline floor mats, custom dash cluster; Auto meter monster tacho, Pivot 350kph digital Speedo, GReddy exhaust temp gauge, GReddy oil temp gauge, GReddy oil presser gauge, Tomei boost gauge, Techtom display unit with shift light, short shifter with Razo gear knob, aircon/heater unit relocated to glove box with HKS F-con, HKS turbo timer and HKS boost controller.

ICE: Jap brand head unit with separate equalizer and aftermarket speakers all round.

490rwhp @ 1.5bar and advanced the timing. Plenty more horse power left to be had if you ditch the F-con, or chase up a retune.

The car has been built as a weekend slider, and street warrior. I don't have quarter mile times, nor never will due to lack of traction and interest in setting the car up for times. What the car has been BUILT for and gets USED for reflects its condition! People who want a show car need not ring this isn't the car for you. In saying that, the car is clean and only has minor marks and a few pin dents. The trim and inside is generally clean, the drivers seat has a small rip in it from my belt, dash is mint and has all aircon vents.

Car is owned by a sales executive, and often sees daily duties, no over heating problems. Been through peak hour morning traffic in Brisbane more then once.

I'm asking $23,500ono OR Swap/Trade The car owes a lot more but my loss is some one else's gain. I'm the first Australian owner, and got the car from a broker, genuine reason for sale; lack of interest and would rather the money for invesments and a more suitable car for work.

*Note* Car is gutted, only has two seats, cage, door trims and dash. All trim come's with car, but you put it in.

Price: $23,500ono OR Swap/Trade.

Location: Noosa Heads, Queensland.

Contact: Josh

Phone: 0407 706 760

Email: [email protected]

Don't PM as I won't check it, all general inquiries on cell # during work hours, unless other wise a very serious buyer.

RWC and Rego negotiated pending price.

R32015.jpg

7127fde0.jpg

Link to comment
https://www.sau.com.au/forums/topic/99337-500hp-ex-track-r32/
Share on other sites

Has Matty tuned the car yet? If im correct in your previous post about this car you said you were going to get him to retune it?

Is the quoted figure from his dyno?

thanks

No he hasn't, I work Monday to Sat. I have zero time to play with cars.

Have you got any pick of the inside and cage?  interested but not sure how ill get it though regency with cage

thanks matt

If you're worried about regency then I think the cage will be the least of your worries.

Greg

Have you got any pick of the inside and cage?  interested but not sure how ill get it though regency with cage

thanks matt

This car won't get through regency the way it is. You would have to take most of the stuff off I'd guess?

Pm me your email addy and I'll send some pics.

yeah cheers, yeah i know ill have to get in to standard which wont be a problem but if there is any signs that a roll cage was fitted then ill have dramas. email me pics on [email protected]

cheers matt

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok gotcha, so one post to fpr  another to bov  and I have the mishimoto boost controller and a link g4+ so I’d just have the tuner set it up properly. For the last two from plenum post throttle to  ecu/ boost controller, I know that I have a hose coming from the ecu that I was confused about so I assume that’s what connect to the boost controller from the ecu? And then the last is just from plenum to boost controller then to wastegate?
    • From there, it was just a quick electrical check, prime the oil and start her up Which, is not what happened. 1. Bloody seppo Aeropro battery holder. Not only was it too tall for the battery (which I'll forgive them for, I have another battery the same nominal size that is taller than Neil's one, but the bracket is a fixed height so the battery was spaced up) But the thing that really shits me is the hardware to hold it on requires a 7/32 Hex key. WTF. No-one will ever be able to remove or install the damn thing without a hex key they don't own 2. Kill switch no longer worked once the console was installed. Neil mentioned above he had to adjust the length but it no longer cleared the console once installed. Sorted. 3. Suspiciously, the brake light holders were hanging in the boot with no globes. Sure enough the stopper on the brake pedal was missing so they are always on unless the kill switch is activated. Will pick one up tomorrow (turns out 32 and 33 don't use the same stopper) 4. All that sorted, I turned on the kill switch, turned the key to ACC. Nothing. Turned it to IGN. Nothing. Checked some fuses and found the main IGN in the boot was missing which improved things once it was replaced. Now ECU and dash lights turn on with IGN but still no fuel pump. 5. Turned it to Start....ECU on, no fuel pump, no starter. Plus the voltage dropped straight to 9v.  I suspect the starter is f**ked but am going to have to work through it all and see what is happening, really looks like more than one issue. Does anyone have the R33 fuse box key with the circuit it sources from (eg BAT, ACC, IGN, SRT etc) and supplies? I can find a translated list showing Amps and circuit without supply circuit, and I can find supply circuit without Amps and target circuit.
    • 3rd time lucky, the AAC is now all plumbed up after getting some final fittings All set up under the plenum of maximum access
    • OK, so the weight has been bugging because it was really low. I did it again today and got a more believable answer at 1246 without driver And with a 93kg driver I'm pretty sure the car was still slightly on the quickjack last time meaning the full weight was not on the scales  
×
×
  • Create New...