Jump to content
SAU Community

Recommended Posts

im goin 2 put a new clutch in my rb25det (neo if that makes a differecne) since i have everything out

i was talking to the bloke at the clutch shop about it and he suggested a brass button clutch with 6 buttons over an organic one, because if you give it a squirt regularly i would wear the organic clutch away very easily... i was concerned about the driveability and durability of the brass button clutch... how long does this clutch last and when it does shit itsself will i need to get the flywheel re-machined... also how hard is it to drive in traffic... i want it to be a nice to drive car not kangarooing up the road because of this clutch

thanks everyone & have a good x mas

Edited by Space Goat
Link to comment
https://www.sau.com.au/forums/topic/99403-clutches/
Share on other sites

I went to a clutch specialist here in canberra, and what clutch they suggested to me, i got. Ended up being $854 fitted for an excede clutch.

You need the fly wheel machined, otherwise it wont mesh correctly 80% of the time (you get mad shudder).

You'll adapt to the brass button clutch, and it might be a little heavy to start off with... but will pay off in the long run. Mines an organic clutch, and at first i was very hoppy with it:) Now i can launch it very nicly.

Dayne

Link to comment
https://www.sau.com.au/forums/topic/99403-clutches/#findComment-1812198
Share on other sites

nar pretty much stock neo motor... will run standard boost for now but will upgrade turbo when this one shits its self... modifications will be usual stuff 3" zorts, pod, chipped ecu. ect ect might get it port matched to improve flow later on aswell as a arc smic and some sort of crazy computer (still undecided)... but for now just want to get it running reliable and stock so i get used to the power of the neo

also driveability in traffic will the 9 button clutch be smoother than a 6... i dont want it to be a pain to drive in traffic

Edited by Space Goat
Link to comment
https://www.sau.com.au/forums/topic/99403-clutches/#findComment-1813023
Share on other sites

get a jim berry clutch, spoke to him and can still retain alot of driveability and no aching left leg after driving and mine has just under 400rwkw which he says this particular one will be fine for it..

ask adrian (2rismo) he used jim berry clutch, its a perfect feel daily driven clutch and he runs 11s

ben...

Link to comment
https://www.sau.com.au/forums/topic/99403-clutches/#findComment-1816108
Share on other sites

I've just recently replaced my exedy HD clutch with a brass button clutch with 6 buttons. I think the driveability of the brass button clutch is actually easier and smoother to drive with day to day around town than my old clutch. Both are very heavy on the left foot but u get used to it.

I was told that the brass button wouldn't last as long as an organic but organic clutch heats up and begins to slip after a few launches. So far, button has been great. Bout $100 more.

Can't tell u how long gonna last though....

Link to comment
https://www.sau.com.au/forums/topic/99403-clutches/#findComment-1816748
Share on other sites

get a jim berry clutch, spoke to him and can still retain alot of driveability and no aching left leg after driving and mine has just under 400rwkw which he says this particular one will be fine for it..

ask adrian (2rismo) he used jim berry clutch, its a perfect feel daily driven clutch and he runs 11s

ben...

I got one too. Dead set awesome clutch. And one of my mates has a full custom one from him in his 3sgte corolla.

Very bitey, but so soft to the foot.

To get his number just google his name. At least give him a ring.

Link to comment
https://www.sau.com.au/forums/topic/99403-clutches/#findComment-1816770
Share on other sites

I'm using xtreme 9 puk. I'd buy it again.

Organic = weak if you're running 200rwkw IMO.. plus heat = no take up. Organic is what people should use in a STOCK car.

If you're running extra boost I would suggest atleast a setup similar to the xtreme 9 puk with 860kg pressure plate. Cubes runs the same clutch with 1100kg pressure plate with his rb30 and he's only said good things.

I wouldn't bother with a brass button as it's old school. Just get a sprung centre with 9 or 6 puks (the less puks the harder the pickup will be) and you'll be right.

Having said that a lot of people will say using a brass button you'll get used to it - which is true, but why make it hard for yourself when you don't need to?

Link to comment
https://www.sau.com.au/forums/topic/99403-clutches/#findComment-1818909
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...