Jump to content
SAU Community

Recommended Posts

Noise is a funny one,How can they sticker us for noise when they let Harley Davidsons get away with it?

Thats right. I have been pulled over and had to produce my exhaust permit, and yet you can hear those things coming from miles away.

  • Replies 57
  • Created
  • Last Reply

Top Posters In This Topic

with neons, they have to be hidden from view, and not able to reflect off any chromed surfaces, they are also to be all of one colour, and not to flash. and linking it with the car lighting, your not allowed to have red lights displayed at the front of your car, so technically that rules out red neons. now to link it with emergancy vehicles, red/blue lights fall under police/ambulance lights, and now western power vehicles with orange lights are emergancy vehinces too(99% sure) so technically that rules out red/blue/orange, and then you are not allowed to display white light at the rear other than the reverse lights, so techincally again white, red, blue and orange are ruled out as colours for neons.

Has this changed recently?

I had red neons under mine (until the rear stopped working), and I have been pulled over a couple of times and thats what they said...that red and blue lights are reserved for emergency vehicles, although I am not sure how they could mix up undercar neons for flashing lights on a roof. Anyway, both times they took my phone number to find out for sure and let me know and I never heard from them both times. So I assumed that they were mistaken if they did bother to call the technical department.

I do know that to be legal the tubes cannot be visible to other drivers, and they cannot pulse etc as Mitchy says, but mine was connected to my light switch with an override and there wasn't any problem with that.

I am pretty sure that for WA rims are not supposed to larger/wider than 2 inches from that stamped on the tyre plackard. So if it was stamped with 16 x 7, then you could go up to 18 x 9, but not sure really how strict they apply those rules.

...I think the standard noise level limit for exhaust is something like 92db or 98db...but there are guys out there with a lot louder, like mine is 102db and I got a mod permit for it, and there are others louder so dont know how strick they are on this.

They are however very strict on ride height. Lowest part of the body must be at least 100mm off the deck, and/or headlights minimum 500mm off the deck, whichever comes first.

In terms of other mods there seems to be big grey areas too. I have a atmo BOV that passed, the inspector just said I need a permit for it, so I got it added to the list...easy as that, where as others have said that they are illegal.  :D

rim DIAMETER can go up 2" from the largest factory option, but width follows my previous post, ie 7" max unless wider was a factory option.

im pretty sure the rear seat windows can be as dark as u want, and only the front 2 windows and back screen need to be the 35% limit.

like a panel van or wagon can paint there rear windows (except rear glass) black if they want.

I had a (R31) wagon with 20% tint all round, when I got a sticker Warwick pits said I had to take ALL the tint off.

I had bought an R31 sedan the same day that I got the sticker (got the sticker later that night) swapped the font and rear door windows, left the rest of the tint on and went to Midland pits. The guy said it was meant to be 35% all round, and couldn't be darker, even if it was a wagon, I asked what about vans and Pano's and he said they could do it because they where classed as commercial vehicles. He still passed me though :D

The same probably goes with bikes, different rules

I would take some of the claims in the first post with come caution, seeig as they think a n external gate is a BOV... I would rather hear something from the DPI, in plain english

the CF ...cars have to be older than 1993..that's when they change the law making Cf illegal....

pod filters have to be secured...

BOV cannot be atmospheric has to plumb back...

also FMIC cannot be water cooled...

Atmo BOV will get passed at the pits, as long as they do not produce to much "noise"

which is totally up to the discretion of the inspector

just disengage the BOV when you go over the pits resulting it the noise coming out through the air filter all muffled

just make sure you get a permit for it

and on that note, if you have a permit mod, dont keep the original in your car as the cops have a tendancy to rip them up

Does anyone know why you aren't allowed to have tyres wider than 9", and also why the front tyres and the rear tyres have to be the same width? As long as nothing is brushing or touching anything I can't see any reason why they are illegal, like from a safety perspective or something.

"I eated the purple berries... they taste like burning!"

Because they said so...

yeah pretty much hey

my rims are 7 1/2 inches

is f**ken annoying

keep having to borrow stockies when i get a yellow

dont think the offset really helps me any either

apparently you are only allowed to increase the Track of your car by 25mm which is stuff all

my rims increase my track by like 2 inches if not more

Ok, so some of you may think I am speaking shit, cos what I am about to say will fly in the face of what some people have posted here, meh.

I just had my rego transferred from SA to WA, the following were found to be legal

17.10 inch rims rear, 17x9 front, both were measured - the only thing the inspector commented on was the width of the tyre - had to be correct for the rim (they are slightly stretched, so he checked), he also checked the track, as I have widebody rear and pumped front guards. He also pointed out I had some rubbing under the rear, I told him that is why I got the adjustable rear camber arms and he was happy.

They will not give a permit for exhausts or suspension. I had coilovers and adjustable arms fitted, no problems, but he also wouldnt give me permits for them - he said 'they are either legal or not' Same for my wheels.

Car legal exhaust is 90db, MC its like 98 or 100 or something, but louder than car, truck is also louder than car.

Guages can be fitted to the A pillar, but must be fitted in a manner that they will come off if you hit your head on them, or out of head impact range.

I also got permits for Bride seats, centre gauges, steering wheel and handbrake cover. He didnt bother giving me one for the shift knob. I also got permits for intercooler and piping, manifold, catch can, front and rear strut braces and pod - basically all the aftermarket looking bits.

Hope that helps

He (the inspector) said he doesnt normally give permits for pods (or exhausts :) ) anymore, but as a couple of guys had been through recently with defects for pods, so I got one off him for it (he was also bitching about cops defecting cars who didnt know what they were doing.

I was also told pre 1996 cars can have c/f or fibre glass bonnets, as they predate ADR front end crash test requirements. vents are ok, as long as they have mesh (to stop fingers). The bonnet must also have a double latching system (as the factory one does).

Do yourselves a favour, if you have mods, get permits, its pretty easy, and I found the guys very reasonable. Its cheaper to spend $30 for a mod permit, than it is for a full inspection. (can save heaps of dramas too)

Oh, and I laminated my permits too :P

I love it over here, in SA, a car has to be practically completely factory to pass, including ride height.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • 90lb/min @ 20psi is wonderful, not so much of a problem with the G35-1050's compressor efficiency (aside from how bad they roll back at higher pressure ratios).  The issue is more to do with the turbine's flow, which is why I'm not sold on going an even higher flowing compressor with the same turbine.  I'd say go back over Motive DVD's testing of the G35 1050 and Hawkins's comments regarding exhaust back pressure issues with it, I'd need to go back but I have in my head he went to the biggest hotside and ended up sacrificing a lot of spool (so it ended up behaving like a bigger turbo) and still had EMAP issues.  I've heard various other experiences along the lines of that. At this stage at least I rate all I've seen about Xonas (for transparency I've not used one directly, but I have spoke plenty with people who have) to have low exhaust restriction for the response they offer for any given setup - basically they allow the engine to breathe, which is good for the engine and makes making power a lot easier.  You arguably don't have to even push quite the same amount of airflow through an engine to make the same power if you don't have the bum plugged up with exhaust gas struggling to escape the engine due to an underflowing turbine.   In terms of reliability, to be fair I've had great luck with Garrett turbos as well - my GT3076R lasted forever, then I sold it and the next owner had no issues, then that car got sold and it was still going strong last I ever heard about it.  The trick is with the old GT-series turbos the compressors etc were no way near as efficient as what we have these days, it was almost hard to push them into severe overspeed situations without having a boost leak or something - and that is what often starts the failure situation.    In terms of your G35 I'm pretty sure you're running yours within sensible limits, something people with Xonas and Precision turbos aren't often so inclined to do.  The "compressor maps" are "Joe blogs ran 45psi through his 6466 so I can do the same" and built their setup to send it to the moon.  I've seen EMAP and compressor speed data where people have actually set that stuff up on Precisions and Xonas which have been run hard and the comp speed numbers are very very exciting at times - like I've seen 76mm Precisions run at rpm that you ideally shouldn't run a G35 1050 lol.   I know people who have run G-series Garretts hard and hard a failure, then replaced them with Pulsar turbos as a cheap "get it going" stop gap with the intent of doing a proper upgrade when THAT fails... and are still running the same thing.   Like anything, ymmv and it's not always to do with the quality or trustworthiness of said product. I've been provided with a bunch of compressor maps for Turbosmart turbos and will update my list based off that, they could prove to interesting reading and an interesting alternative as well.
    • Just cage it, call it a race car, and then fall in love with the chirp chirps through pit area!   Also, this is coming from someone with a completely locked diff...
    • I still have an old R32R left over from when they were a thing in the early 2000's. It was, for its time, done about right. But its time was 20 years ago.  I did try and update it a while back but it was cruelled by a (recommended) muppet of a tuna who couldnt tell his MAP from his TPS. The original spec was: Power FC, 700cc Sards, Nismo pump, 2860-5's, cams (Basically Poncam A's), Z32 AFM's and a half sorted oiling system. Thereabouts 430rwhp irrespective of what was done. So, yeah, very 1990's. I eventually got sick of it not being very refined and bought a Link G4 PNP with some 1000cc Bosch injectors. This was tuned badly and I put the car in the shed for a few years whilst I sulked and went and did other things. Ive come around to the idea of getting it going again so it has a new gearbox installed and some other minor things in the planning. So my questions are, variously (In the context of keeping the Link) What other sensors should I be running eg It has no wideband on it at the moment, nor fuel pressure. $? Is it worth chucking the old ignition system (ignitors etc) for new ignition coils? $2k? Cam/crank angle sensors? Can keep the aircon? $? Anything else? Sorry to launch another what should I do with my car thread but, you know, what should I do with my car? Random photo for historical context.
    • If you think that's harsh, go experience a KAAZ 🥲 Thoughts and prayers for Dose. I had mine modified by a diff shop to make it less brutal, no idea what they did but it's not as brutal as before. The Asian in me was being tight before and went KAAZ instead of a Nismo, lesson learned.
    • From what I understand, the normal Nismo diff is a bit harsh, and the Pro is the one that behaves more nicely, and you only pay Nismo tax twice to get it.
×
×
  • Create New...