What Is The Stock Height Of An R33

[Cro_boy_Mario]

what is the stock height of an r33

[Nathan_G1]

too high

[Cro_boy_Mario]

i dunno why but when i bought mine it sits 180mm off the ground on the front, and now that i got my custom enclosure in my boot, sits about 160mm off the ground on the rear

[LO_R33]

You scared of it being illigal height? Most skylines (most not all) have some form of aftermarket suspension (coil overs, springs, shocks etc) though your car could be sitting lower then stock because the suspension is worn? I'd assume a good 10odd cms gap inbetween the wheels n gaurds stock?

Dayne

[Sydneykid]

The standard suspension industry height is measured centre of wheel to guard. This removes all the variations in bumper bars, exhaust systems, wheel diameter etc etc. Standard, new, R33 GTST is ~380 mm centre of wheel to guard front and ~370 mm rear.

cheers

Edited December 26, 2005 by Sydneykid

[Cro_boy_Mario]

im definately lowering the car, just wondering what was the stock height, probly gonna lower is 3 inches all round

[benl1981]

3 inches!! Why bother. Its more a hassle. Its good to hop in a car that you dont have to worry about scrappage. Even mine at stock height has a few issues with the exhaust sitting lower near the rear if car is fully laden.

The cars handle pretty well at close to stock height.

Edited January 2, 2006 by benl1981