Jump to content
SAU Community

Recommended Posts

Guest sir_GTR

Thnx Matt :D

umm to be honest I haven't really stretched my car beyond 3rd gear yet :confused:

all my runs with other cars have been from standing starts and i usually ease my pedal well after 2nd gear (around 120k+/hr) ...never really hit 3rd gear (too afraid of speeding fines)

So i dont really know how fast i can get to with my 3rd before changing to 4th...Will i get to 4th gear with the 1/4 mile run?

sorry for so many *newbie* questions :bonk:

Andy,

Adelaide International Raceway is straight up Port Wakefield Rd heading out of town, you can't miss it on the left hand side.

It's ~$50 to run all up, for as many runs as you can fit in.

Yep you need an ADR approved helmet, & you must wear long pants/long sleeved shirt.

180km/h is ~111.85mph, which is a good enough terminal speed (TS) to run into the 12's with decent traction.

You probably won't hit the limiter before the finish line but you "may" before your terminal speed is read.

TS is an average of the last 30' of track before the line & 30' past the line (I think?) so your elapsed time (ET) won't be effected but if your going quick enough you "may" hit the limiter after the line in that 30' during the TS reading. Hope that made sense :D

On my last run (Nov01) I ran 13.1 @ 109.5, & from memory I backed off just after the line doing well over 180km/h, I probably would've got a higher TS if I'd kept my boot into it a touch longer :(

My car when stock (or close too) hit the limiter @ ~190+km/h so I think you'll be fine :)

WTF? How did my post end up after yours Andy? Oh well never mind:)

Fire away with the questions mate I'm happy to help if possible :)

Yeah you'll need 4th just before the line, unless the 8k rev range of the RB26DETT can get you over the line in 3rd? It might be worth asking the GT-R guys who drag race their GT-R.

All,

Something to keep in mind for drag strip first timers. The AIR drag strip is totally different to launch on compared to the average set of lights! You'll need more rev's off the line @ AIR or you "will" bog down badly :mad: It's a huge shock to feel how quickly your car takes off (or feels like it is) on a grippy VHT prepped surface :mad: Big rev' launches also put more strain on the drive train due to the lack of wheel spin that a road surface would normally reduce!

Hey Guys,after going to the drags sunday i was thinking that we should go to the next meet where hopefully Johns R33 GTR will be there to crack the 9`s.We can be like the support racing to the main event.We can go out and have some fun aswell as support John to hopefully a record run.

We`ll have the best tuners in Adelaide(TILBROOKS) out there so we can nag em(only joking Martin).

LETS GET AS MANY SKYLINES OUT THERE AS POSSIBLE.

I have atleast 3 CAMS/ADR approved helmets that i can loan.

all i want to know is when is the next meet?

Matt

I'd be up for that. I think that from memory that the street meets are on the first weekend of every month. It would be cool to get a dozen or so Skylines out there. Now I just have to get my clutch sorted.

Chris

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sane enough. Remove the roof liner, because the acid will go everywhere.
    • Thanks guys, I really appreciate the help and experienced opinions.  I have spent a lot of my life working on boats so I'm pretty good with fibreglass. I'll take everybody's advice in here;  I'll cut a little more of the 2nd layer away as it's a bit crunchy rust and also it's sitting high now. Then I'll wire brush it all a bit to get off anything loose, then I'll soak the bejesus out of it all in rust converter. I'll make sure to get a little hose piece and feed it into all the holes and gaps between the roof layers. Then I'll fibreglass up the holes.  Then I'll get a pallet of filler and mix it with 3 buckets of hardener and hope that is enough to build up the roof corner.  Does that sound sane? Is one type of filler better than others for this?
    • My goals for it atm are to get it registered, respray and some mild power gains eventually... I picked up the car from an elderly gentleman near the border of NSW and VIC, its honestly a bit rough and looks like its been driven on a farm (because there was so much dirt underneath). Last week I dropped the subframe and emptied the old fuel out + added a new fuel pump (think the old one went bad from old fuel). Now I'm onto fixing a coolant leak at the rear of the engine + adding a new radiator as the old one is corroded. After that i have a new bumper, coils (as the old were leaking) and lots more
    • Welcome buddy! Plenty on here and YouTube. What are your plans for it? Good luck with the Rwc and Rego bud!
    • Love this so much! Please post a photo when you have a bike on the trailer.  I was a little bit worried about having a tow bar on the Skyline, but having it hidden behind the number plate is genius
×
×
  • Create New...