Jump to content
SAU Community

Recommended Posts

Ahh...  I guess you didnt know that kippax Caltex has the 98RON stuff for like 6 months +...

Or are you not a fan of Caltex?

As I said.... "decent fuel". On occasion, people have hinted that Shell provides Caltex with Optimax for sale as Vortex Gold. But no, I wasn't aware Kippax had Vortex Gold....

i can absolutely confirm, mj, that caltex's high octane fuels are not refined by shell. my uncle works for caltex and i've seen huuuuuughe fuel tanks with their premium juice with my own two eyes. they had a big A2 poster/flowchart up showing people how they refine their high octane brews and why they're supposedly better.

my car pings its tits off on shell's fuel - never had any problems on vortex or bp.

d

Edited by djhatton

My car pings its ass off on anything but Ultimate and Synergy 8000... not sure why, as Vortex 98 is meant to be pretty good but my car flatly refuses and starts making the knock meter dance when I used it :)

Good thing mines been off the road for the whole no Ultimate saga... it is back at Chisholm BP though in decent quantities :D

On that note though, once all my fuel lines are replaced with the non standard rubber crap, I will be running Optimax Extreme only... have been seeing some damned good results with it.

Edited by Amaru
I;ve been having great results with regular unleaded just about everywhere! my car always seems to start, although it doesn't seem to matter what i use lately the car still seems slow...hmmm wonder why that is?........

pahahahaaaaa! oh andy poor man. you need to park that behind of yours in another performance car.

and yes, i've noticed bp has ultimate back.... hoooraaa!!!

d

well i am trying to work it out buy it's 3cents more than optimax which i think may be 2cents cheaper than ultimate though...

i may be wrong but isnt optimax only 8cents more than regular

ultimate is like 11 cents... plus dont forget at least you can get a 4c discount through coles :P

On that note though, once all my fuel lines are replaced with the non standard rubber crap, I will be running Optimax Extreme only... have been seeing some damned good results with it.

What's with the rubber? I thought ethanol caused corrosion in the metal lines, not attacked the rubber? I've also had bad luck with some of the 'off the shelf' fuel hose (non-EFI, however) from Autobarn - within six months, it goes hard and gets splits in the outer layer. Had the same problem many years ago with 'super duper US quality' oil cooler hose for an auto. So - buy really decent hose!!

What's with the rubber?  I thought ethanol caused corrosion in the metal lines, not attacked the rubber?  I've also had bad luck with some of the 'off the shelf' fuel hose (non-EFI, however) from Autobarn - within six months, it goes hard and gets splits in the outer layer.  Had the same problem many years ago with 'super duper US quality' oil cooler hose for an auto. So - buy really decent hose!!

Have spoken to two places who have both said, if you want to run ethanol for the forseeable future, ditch the factory rubber lines.

I think the plan was to use brand new high quality EFI hose under the car, and Earls braided hose and fittings everywhere else :huh:

That is correct, Nissan have flatly said do not use ethanol in our engines.

supadan: If you have a stock ECU it should be ok, if you have an aftermarket ecu it will need a retune as the ethanol content = more oxygen = car will lean out.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Sharing results from recent Liberty Walk R35 GTR, since they are still considered as somesort of a V36 Skyline. We do them turbos too. This are high flowed SS-1 models with ball bearing conversion done.  Car have managed to pull 485awkws @ 20Psi so far pushing limitations of factory built engine. The build list for R35 GTR enthusiasts as follow : HyperGear high flowed stock turbos in SS1 (G25-660 specs) Custom titanium intake pipes. Vspec performance titanium front pipes. Vspec performance 4" titanium exhaust. Upgrade fuel pumps. 1200cc injectors. Ignition coilpacks Hks intake plenum. Hks intercooler piping. Greddy intercooler. Greddy bovs. Top-secret coolant reservoir. Emtron ecu. Straight E85. Built gear box.  
    • Nah no bearings, just slip fit.  Would be a reasonably challenging but not impossible job to modify it to run bearings but I'm hoping that's not necessary as I may have well built one myself if I end up spending hours modifying it!
    • Brumbys with good shells are bloody expensive, I've looked at 2 "cheaper" cars, and walked away from both,  plus after some research spare parts are fairly sparce I'm starting to think that I missed the boat on finding a clean one that is straight (ish) and without alot rust I'm starting to think about a old Hilux as panels and other parts are much more available as they sold tens of thousands of them I use to be indecisive but now I'm not sure
    • A Brumby would probably fit a big metal toolbox in the back... this is how it begins  
    • Picked up a new OEM boot seal for the MX5 today as the old one got ripped a bit by me being a idiot by seeing if I could fit a large metal tool box in it, it didn't fit, and ripped the seal with the corner of the tool box I am still waiting on time to get the cams and new balancer installed, as well as the repairs to the boot Time will not be an issue soon though
×
×
  • Create New...