Wolf 3d On Gtr

[ali-turko]

hey guys i finking of putting a wof 3d ver 4 in my 32gtr

has any one every had one in there gtr.

cause im getting it for notjing so is worth putting in or not thx.

and i got told they dont use the sirflow metres is that true???

[N I B]

I have one on my wifes GTR and WA has many with them.

OK one large problem thats shared with all MAP sensored ECUs on multi throttle engines is the map signal pulses so it takes a tuner with experiance with these setups to get close to right(always will be a compromise)but the results are still good.

Single throttle conversion works very well and shows good power gains also.Give me a pm if you or your tuner need help.

[RB30-POWER]

Would go PowerFC anyday of the week myself.

However Wolf have been used with great sucess in a number of WA GTR's.

[N I B]

Its time more tuners work out how to use this ECU as it does have a lot to offer but many ppl are scared of by the amount of functions it can do.

Download the software and take a look.

www.wolfems.com.au

[RB30-POWER]

So true.

I've always said the Wolf3D can give good results.

But its very complex and time consuming to setup thanks to all the options.

Some good base map values for particular engines and recommended values for injector voltage, air temp, water temp compensation would make it much more friendly.

Not to mention the end user that pays the tuner for his time to configure all these things, that are already pre-programmed with the likes of the PowerFC

[N I B]

Most of the AEM dealers have the base maps and the cost is no higher than any other ECU.

[ali-turko]

thx for the advice ppl