Greddy Profec Install

[MearCat]

I've done a heap of searches on the forum and can't find anyone who has posted any pics or tutorial on how to install a Greddy Profec (B Spec II) boost controller in an R33. The electrical wiring is easy (wire it straight to the cig lghter power) but I need to know (WITH PICS) eacty which hoses to tap into, what stock hoses to block off etc etc

Also Do the r33 run a single or dual port actuator?

Edited December 27, 2005 by MearCat

[Wink]

Picture 1

- The GReddy solenoid fully replaces the stock one.

- Black hose from the actuator goes to the GReddy solenoid as shown

- The red hose attached to the GReddy solenoid goes to Picture 2

- Electrics are wired up simply as shown.

Picture 2

- This photo is located at far end of the plenum, next to the BOV.

- The bottom red hose attached to the T-piece comes from the solenoid in Picture 1

- The right red hose goes to the plenum as shown.

- The black hose on the left goes to the BOV.

Picture 3

- This photo is located at near end of the plenum, next to the wiper washer bottle.

- The bottom hose with the filter attached goes to the main control unit inside the cabin.

- Other hoses are put together simply as shown.

Edited December 27, 2005 by Wink

[MearCat]

Brilliant - exactly what I needed! Thanks Wink. If you were to install a boost gauge as well, would I tap the hose into the same point in Picture 3?

[Wink]

Yes tap the hose that comes out of the filter with something like a t-piece.

The GReddy Profec B-Spec 2 is also an electronic boost gauge so a boost gauge is not really needed but if you want an analog display that's the hose the boost gauge would use.

[Bunta]

Nice one wink, I will probably use this too

[MearCat]

Wink - Is the T-piece that you've used (in Picture 2) the same as what's available in any pet/fish supply store?

[Wink]

Wink - Is the T-piece that you've used (in Picture 2) the same as what's available in any pet/fish supply store?

<{POST_SNAPBACK}>

It comes with the whole package.

See page 4 of the PDF manual to see the parts list:

http://www.greddy.com/tech/PROFEC_B_SPEC2.pdf

You'll notice that the t-piece (called "3 Way Fitting") is shown in the bottom left.

Edited December 28, 2005 by Wink

[MearCat]

It comes with the whole package.

See page 4 of the PDF manual to see the parts list:

http://www.greddy.com/tech/PROFEC_B_SPEC2.pdf

You'll notice that the t-piece (called "3 Way Fitting") is shown in the bottom left.

<{POST_SNAPBACK}>

I wasn't referring to the white "3 way fitting" in Picture 3, I was talking about the Brownish T-piece in Picture 2. That T-piece does not come with the package. Is this piece already on the car? I don't get my R33 for another month yet so I can't just go and check my car.

Edited December 29, 2005 by MearCat