R32 And S13 Parts.. Ebc, Edfc, Tt, Gauges, Catch..

[Yorik]

Items For Sale

I have had a good clean out and have the following parts to sell off. Some are from my old 180SX, some are from my R32 GTR. Some have never been fitted. Genuine reason for sale, I want the money to buy more parts for the GTR. For more information, PM or Email me. I will endeavour to update and keep an eye on the post as much as possible, but the items are being listed on multiple forums. All items are located in Karratha, WA (6714), unless otherwise specified.

Please read conditions at bottom. All items are used unless otherwise noted. All items were working at time of removal. Most prices are cheap already, please don't make unreasonable offers. Pictures are large, 2592x1944 pixels so might not be 56k friendly, I am not dropping the pic size and uploading more images as most people want high res pics anyway..

HKS EVC 3 Boost Controller

HKS EVC 3 Electronic Boost Controller. Dual Profile EBC.

Will supply an Electronic Copy of the English Instruction Manual to the buyer.

No Hoses or filters.

Pics Of This Item Here

Price - $200

FET Auto Turbo Timer

FET TB-206 Automatic Turbo Timer.

Has 2 Auto Profiles and Manual Functions

Comes with Harness for R32 GTR, should also fit SR20 S13. (Harness Pin outs are identical.)

No Manual available. Never tried to find one.

Pics Of This Item Here

Price - $50 Donation Sale

FET Turbo Timer

FET Manual Turbo Timer.

Times in 1 minute increments from 1-9. About as simple as you can get, with some adjustment.

Comes with Harness for SR20 S13, should also fit R32 GTR. (Harness Pin outs are identical.)

No Manual available. If you need one, you shouldn't have a car that needs this item.

Pics Of This Item Here

Price - $25 Donation Sale

Nismo Mech Boost/Vac and Digital EGT Gauge

80mm Nismo Mechanical Boost/Vac Gauge with Digital EGT Guage.

The Digital EGT Guage has Peak Memory and Warning Functionality.

Comes with Thermocouple. Cable was extended in Japan, but still works well. Extension cables have been cut.

No mounting hardware for Thermocouple, but it is the same as the mounting threads for most EGT Thermocouples.

No Manual available. Looked for one, but failed miserably, this thing is about rare as rocking horse hooves and it is bloody huge, you will definitely be the only person on your block with one..

Pics Of This Item Here

Price - $120 (SOLD)

Cusco Catch Can

Original Cusco Catch Can, mounting bracket modified to suit SR20 RPS13 mounting points as pictured below. We tried mounting this in a mates CA18 S13, but the wholes weren't in the same place on the Suspension tower, but on another SR 180SX that I have checked the holes were in the same place.

I mounted it in this position as it was much more convenient once all the rest of the stuff was in there, if you have ABS, I'd say that it won't fit..

Pics Of This Item Here, including pic of mounting position in my old 180sx.

Price - $75

S13 Braided Brake Lines

NON ADR Approved, never fitted, fittings never checked, check the picture to make sure it has what you need.

Originally purchased from NS.com..

Pics Of This Item Here

Price - $50 (SOLD)

S13 SR20 Polyurethane Gearbox Mount

Fitted for about 50kms. Removed after accident.

Originally purchased from NS.com..

Pics Of This Item Here

Price - $40

S13 SR20 Engine Dampener - Silver

Conditon - Not the best, has marks where it rubbed on my my turbo outlet pipes once I extended them. Other side has no marks, if you aim it down you won't know the difference..

Priced accordingly.

Pics Of This Item Here

Price - $50

Universal Earthing Kit - Blue

Once again fitted to my S13 for about a week before the accident.

Has 5 Large Guage wires, with gold plated ends and largish Gold plated Common point.

Pics Of This Item Here

Price - $30 (SOLD)

TEIN HA Coil Overs - Front S13

Currently located in Perth - SOR

Front Only

Adjustable Camber Tops Included.

Were fitted to my 180SX, never adjusted the dampening force, but were really nice.

No C Spanners.

Markings on the Coil Overs are

DKN20-11746-L

S13-FL 97B TEIN

This is for the Left Coil Over, the Right one has the "L"'s replaced with "R"'s.

These are not in perfect condition as can be seen from the pictures, but were working perfectly when removed from the car.

These are not available to be freighted at the moment. Pick Up Only..

Pics Of This Item Here

Price - $250 (SOLD)

TEIN EDFC - Electronic Dampening Force Controller

12mm Motors. This kit is designed for 12mm top Tein Coil Overs.The above coil overs will not fit this EDFC

I originally bought a Second Hand Kit, and mistakingly got one with 12mm motors, where my TEIN HA's on my R32 GTR needed 10mm motors, so I went out and bought a completely new kit, with 10mm motors. Here i am selling the parts that I didn't use out of the new kit and the parts from the s/h kit. In total there is a complete EDFC kit, the motors and Head unit are S/H, but everything else is brand new, inclduing the wiring, infact the wiring is unopened.. Please be sure to check to make sure that you have 12mm motors.

Pics Of This Item Here

Price - $320

Greddy Mech Boost/Vac 60mm Gauge + a bonus cup..

A used 60mm Greddy Mechanical Boost/Vac Gauge, left over from all of my works.

This needs new globes as I have taken them out to repair some blown globes in my other Greddy Guages, yes I have quite a few of these, I like them.

Comes with a free 60mm cup, but no stand unfortunately as I can't find it..

Pics Of This Item Here

Price - $50 (SOLD)

Drift Button - Blue (Brand New)

Brand New Drift Button that I got off of NissanSilvia.com, but never fitted due to the accident.

Pics Of This Item Here

Price - $10 (SOLD) Donation Sale

Greddy Oil Cap to suit SR

Was fitted to my SR for a few weeks, should fit most Nissan Engines, might be best to check first.

Pics Of This Item Here

Price - $40 (SOLD)

Greddy Radiator Cap

1.3kg/cm.. Once again only fitted for a few weeks.

Pics Of This Item Here

Price - $15 (SOLD)

Greddy/Trust Turbo Timer Harness for R32 GTR/S13 SR

I got this for my 180SX and fitted my Trust Full Auto TT. I then got another one to fit this same TT to my R32 GTR, without realising that the Harness is exactly the same.. So here it is nice and cheap.

Part No: TT14-22 - 15920002

Pics Of This Item Here

Price - $15

Conditions

Only items shown in the pictures are available and will be supplied with the item. Please check to ensure that all the correct items are available.

Items are listed on multiple forums and may be removed with no notice or already sold.

Donation will be made to the forum on which the item was successfully sold. This is only for the items marked as Donation items.

No responsibility is taken for purchase of the incorrect item.

It is best to contact me via PM or Email, as I am not by a PC 24/7 checking these forums for your reply post.

Payment

Payment methods accepted - EFT Bank Transfer, COD, Money Order, Paypal.

Freight

1. Items will only be sent once Payment has been received AND/OR cleared.
   
2. All items to be sent via Australia Post COD for the frieght charges to be charged to the buyer. This way you are paying the exact freight and it is trackable (to an extent.)
   
3. All items, unless otherwise noted, will be sent via Australia Post COD for freight charges. Buyer is responsible for all frieght charges from Karratha WA.
   
4. Items will be sent on Friday only (only day I can make it to the Post Office.)
   
5. Insurance can be added to frieght charges at the request of the buyer, but will not be added if not
   
6. If you prefer another form of transport, please contact me.
   

Edited January 1, 2006 by Yorik

[J_R32]

will the edfc fit r32 gtst ha's?

[Yorik]

will the edfc fit r32 gtst ha's?

<{POST_SNAPBACK}>

Hi

Basically it will fit HA's that have the thumbwheel adjustable Dampeners on the top and have 12mm threads on them. My R32 GTR HA's have 10mm threads, I don't know what size the GTST ones are.. Best to measure the thread below the thumbwheel adjuster. Shouldn't take too long to do.

Cheers

Yorik

[Chard]

hey man its richard here.... zac n mal cuz... bit of a shame i dont need any of the stuff u is sellin other wise i would grab it off ya oh well hahahaha

chard

[Yorik]

Hey Chard, hows that GTS4 of yours going? Had it down the Plex yet? We need to get that thing on a dyno day to get some baseline figures out of it..

[J_R32]

do you have the part number for the edfc?

[Leadfoot]

Am interested in the Nismo boost/EGT guage.

PM sent. Will discuss payment via PM.

Items For Sale

I have had a good clean out and have the following parts to sell off. Some are from my old 180SX, some are from my R32 GTR. Some have never been fitted. Genuine reason for sale, I want the money to buy more parts for the GTR. For more information, PM or Email me. I will endeavour to update and keep an eye on the post as much as possible, but the items are being listed on multiple forums. All items are located in Karratha, WA (6714), unless otherwise specified.

Nismo Mech Boost/Vac and Digital EGT Gauge

80mm Nismo Mechanical Boost/Vac Gauge with Digital EGT Guage.

No Manual available. Looked for one, but failed miserably.

Pics Of This Item Here

Price - $120

[Yorik]

do you have the part number for the edfc?

<{POST_SNAPBACK}>

The Part number for the EDFC, well the as the motors are all 12mm it would effectively be the "EDK01-12120" model. It will however be supplied in a box marked as 'EDK01-10100' but I can assure you that the motors are the 12mm type..

Here's a link to some extra information.

TEIN EDFC Info Thats a US website and the information doesn't fully cover all of the import models, but it does give all the necessary information. I suggest downloading the instructions, see how it works and where it attaches and then have a look at your HA's..

[J_R32]

i cant find info on my coilies let alone if it will b capable wif edfc..sigh...the thumbnail is 12mm, but thread is 10mm..

Edited January 2, 2006 by J_R32